Olympus P-200 Beware of moisture condensation, Operate the printer at least once every six months

Page 29

Care and storage

Beware of moisture condensation.

Moisture condensation means that water vapor in the air becomes liquid and sticks to the printer surface. This phenomenon is caused by the following.

Rapidly heating the room in which the printer is placed

Cool air (from an air conditioner, etc.) blown directly at the printer Moving the printer from a cold place to a warm place

Moisture in the air will condense on the paper, deteriorating print quality or causing paper jams.

Under conditions where moisture condensation has occurred or may occur, do not operate the printer until it is dry or until there is no possibility that condensation will occur.

Do not spray volatile solvent on the printer or allow the printer to be in contact with rubber or plastic products for an extended period of time.

For example, spraying an insecticide on the printer or wiping it with thinner or benzine may deteriorate or discolor the printer cabinet. Such deterioration and discoloring also occurs if the printer is in contact with rubber or plastic products for an extended period of time.

Operate the printer at least once every six months.

If the printer is not used for an extended period of time, it may malfunction. Operate the printer at least once every six months.

Carry the printer with both hands.

When lifting or carrying the printer, use both hands.

Transport the printer carefully.

When transporting the printer, place it in the original box with the original packing material. If you don't have the original packaging, pack the printer with enough cushioning material to absorb any impacts during transportation. Be sure to remove the SmartMedia, CompactFlash and automatic feeder from the printer.

10

Image 29

Contents 200 User Registration Table of Contents System Requirements Turn on the printer and the PC. Launch Windows Installing the SoftwareConnect the printer to your PC Insert the floppy disk into the PCs floppy drive Select Local printer as the printer connection destination Double-click the AddPrinter iconClick End to complete installation File menu, click Delete UninstallationRun the application and open the images you want to print PrintingClick Print Set the number of prints CopiesClick the name of the queued document you want to cancel To cancel printingWhen the print monitor is displayed Tips for printing Click Properties Split PrintFile menu of the application, click Print Single Set the image quality in the Color adjustment sheet Adjusting the Image QualityJammed, etc Troubleshooting GuideBefore printing Olympus America INC 200 Owners Record Table of Contents Duplication restrictions PrecautionsIntroduction If the power cord is damaged, unplug it Safety precautionsDo not install the printer in the following places Do not damage the power cordDo not disassemble or modify the printer Do not place liquids on the printerDo not hold the power cord plug with wet hands Connect the power cord correctlyDo not overload the power outlet Do not use the printer in the following placesPage Do not pull the cord with a jerk Do not move the printer when the power cord is tautDo not block the vent Operate the printer at least once every six months Beware of moisture condensationCarry the printer with both hands Transport the printer carefullyGetting Started Unpacking the printerMaking a variety of prints What you can do with the P-200 Digital color printerPrinting of images from a PC High-quality overcoated printsIdentifying the parts Paper Feed Cassette Operation PanelTo supply power from the provided AC adapter Setting up the printerSetup Battery power operation Recharging the batteryRemoving the battery Using print packsRemaining battery power indication Loading the ink ribbon cartridge Remove the ink ribbon cartridge, and then re-insert it If the cartridge compartment lid does not closeTo load a half-used ink ribbon cartridge Handling the ink ribbon cartridgeTo replace an ink ribbon cartridge Loading print paper in the paper feed Cassette Loading print paperStorage precautions Installing the paper feed cassette Onto the printerPrint all-frame print DPOFprint index print PreparationBasic Printing Inserting the card into the printers slot Opening the card coverBasic Printing Never attempt to insert or remove CompactFlash while Digital cameras with a file name display function PrintingTo change the frame number display to file name Display Frame Basic Printing To cancel printing Other Printing Functions Making split printsMaking split prints of the same image Indexprint Frame No. designation AII-frame display All-frame printing Appears on the control panel Printing DPOF-reserved imagesSmartMedia or CompactFlash card. Date printing Printing the dateBefore you begin Adjusting the sharpness For Your Information TroubleshootingIf indicators light or blink Paper is jammed Remove jammed paper. See below If print paper is jammedFor Your Information Storage after printing About the ink ribbon cartridge and print paperPrinter SpecificationsProtection against such interference in a residential FCC noticeAccessories as of October Are not indicated in each case in this manual Print index1100 6MJ