V SERVICE DIAGNOSIS
The burners when on will produce clear blue flames directed at the inside walls of the heat transfer tubes. The radiant’s fins, located towards the rear of each transfer tube, will glow bright red, helping to ensure optimum heat distribution into the Pasta System vessel. All radiants should be pushed to the rear and then pulled gently forward (until their retaining clips engage the rear of the tubes) for optimum heat distribution.
On constant pilot models, the pilot light will be between 3/8" to 1/2" high and will use about 180 BTU’s of gas per hour.
CUSTOM PASTA™ SYSTEM CONTROL PANEL WITH DIGITAL TIMERS
ITEM | DESCRIPTION | QUANTITY | PART NUMBER |
1 | THERMOSTAT | 2 | 031466 |
2 | DIGITAL TIMER(S) | 2 | 056921 |
3 | TOGGLE SWITCH | 1 | 004501 |
4 | INDICATING LIGHT, AMBER - PILOT ON | 1 | 031624 |
5 | INDICATING LIGHT, GREEN - SECONDARY BURNER ON | 1 | 009375 |
6 | INDICATING LIGHT, BLUE - AUTOMATIC FILL | 1 | 009256 |
7 | MANUAL FILL SWITCH | 1 | 004304 |
8 | TOGGLE SWITCH - MAIN | 2 | 004499 |
9 | DIAL PLATE | 2 | 034975 |
10 | KNOB | 2 | 004163 |
11 | FLAME SWITCH (NOT SHOWN) | 1 | 037406 |
12 | LOW WATER SAFETY CONTROL “A” BOARD (NOT SHOWN) | 1 | 001167 |
13 | AUTOMATIC WATER FILL CONTROL “B” BOARD (NOT SHOWN) | 1 | 001166 |
|
|
|
|
16