Thetoprackisdesignedforcups,glasses,andsmalleritems.
(Seerecommendedloadingpatternsshown.)
NOTE:Thefeaturesonyourdishwasherrackmayvaryfromthe
drawingsshown.
The bottom rack is designed for plates, pans, casseroles, and utensils, (See recommended loading patterns shown,)
NOTE: The features on your dishwasher rack may vary from the drawings shown,
10 place setting
12 place setting
•Place items so open ends face down for cleaning and draining.
•Load glasses in top rack only. The bottom rack is not designed for glasses. Damage can occur.
•Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots.
•China, crystal, and other delicate items must not touch each other during dishwasher operation, Damage may occur.
•Load plastic items in the top rack only. Only plastic items marked "dishwasher safe" are recommended.
•Load plastic items so the force of the spray does not move them during the cycle.
•To avoid chipping, do not let stemware touch other items.
•Small bowls, pans, and other utensils can be placed in the top rack. Load bowls in the center section for best stability.
_:
10 place setting
Do not load glasses, cups, or plastic items in the bottom rack. Load small items in the bottom rack only if they are secured in place.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.
12 place setting
Load cookie sheets, cake pans, and other large items at the sides and back. Loading such items in front can keep the water spray from reaching the detergent dispenser.
Secure heavily soiled cookware face down in the rack.
Make sure pot handles and other items do not stop rotation of the spray arm(s), The spray arm(s) must move freely.
Do not load items between the bottom rack and the side of the dishwasher tub because they might block the water inlet opening.
NOTE: If you have removed the bottom rack for unloading or cleaning, replace it with the bumpers in front.
10