Oven Cleaning
FEATURE OVERVIEW
•Starting the
To Start the Self-Clean Cycle
The CLEAN (_) | pad controls the |
cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So to
*It is recommend to use a 2 hour
During the
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when
opening the oven door after the
INSTRUCTIONS | PRESS | DISPLAY |
To set the controls for a 3 hour
1.Be sure the clock is set with the correct time of day and the oven door is closed.
2. Press (_. | "CLEAN" will flash and "3:00" will show in the |
display (Fig. 1). The control will automatically clean for a 3 hour period (default
clean time is desired, press _ | for 2 hour or press ____ |
for a 4 hour clean time. Set the cleaning time based on the amount of soil; light, medium or heavy (*See above).
3. Press (_ | .The "DOOR LOCKED" icon will flash; "CLEAN" |
icon and the letters "CLn" will remain on in the display (Fig. 2).
4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator light will stop flashing and remain on. Also, the oven icon will appear in the display (See Fig. 3).
Note: Allow about 15 seconds for the oven door lock to close.
When the
f.The time of day, the "DOOR LOCKED" and "CLEAN" icon will remain in the display (Fig. 4).
2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Fig. 5).
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a
1, Press _.
2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed,the oven door can then be opened (Fig. 5).
(Z orC
or
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
28