Topcon CT-80, COMPUTERIZED TONOMETER instruction manual OFF ↔ MODE1 ↔ MODE2 ↔ MODE3 ↔ MODE4 ↔

3 Press , on the control panel, move the cursor to “EQUIPMENT” and press

MEASUREMENT SWITCH .

4 Press , on the control panel, change the equipment No. and press

MEASUREMENT SWITCH .

The equipment No.(EQUIPMENT) can be selected from 0000 to 0099. Each time , is pressed, the display changes as follows:

OFF ↔ MODE1 ↔ MODE2 ↔ MODE3 ↔ MODE4 ↔

When setting the speed, the display changes from 2400-9600 each time , is pressed.

2400 ↔ 9600

“EQUIPMENT” and “WORK ID NO.” can be reset by pressing .

5 Press , on the control panel, move the cursor to “EXIT” and press MEASUREMENT SWITCH . The Menu screen returns.

19

PREPARATIONS