Topcon COMPUTERIZED TONOMETER, CT-80 Setting RS-232C Communication Conditions, Work ID no

•Data Receiving

Patient ID data 13 byte

(Example)

or

or

Setting RS-232C Communication Conditions

In the Menu screen, move the cursor using the , keys on the control panel, and press MEASUREMENT SWITCH . Further, move the cursor to an item to be changed on the screen shown below, and press MEASUREMENT SWITCH . [SET→∗∗∗∗] is displayed at the bottom of the screen. Change the setting using , . After changing, the setting is registered by pressing MEASUREMENT SWITCH . After setting, move the cursor to EXIT and press MEASUREMENT SWITCH to return to the Menu screen. For further details, see “RS-232C Input/Output Settings” on page 18.

Items of setting (5 items)
⋅ Machine No. (EQUIPMENT)	Set value: 0∼99. (For shipment, “1” is set.)
	When more then one unit of inspection equipment
	is installed in the same hospital, for example, data
	can be controlled using these Machine Nos.
⋅ Input ID mode (ID MODE)	Set value: 1 or 2 (For shipment, “1” is set.)
	1. For inputting patients' ID numbers.
	2. For inputting the temporary ID numbers of new
	patients.
⋅ Work ID No.	Set value: 0∼9999 (For shipment, “0” is set.)
(WORK ID NO.)	Desired serial numbers can be attached to measure-
	ment results. The number is automatically added (1
	at a time) each time the printing of data communica-
	tion is performed.

50

REFERENCE