PREPARATIONS
HOW TO INSTALL THE INSTRUMENT
CAUTION
CAUTION
CAUTION
Before carrying the instrument, be sure to affix it firmly by turning the fixing screw at the base.
If the instrument is moved with the screw loosened, it may result in damage to the instrument.
When moving the instrument, be sure to hold it at the bottom surface with two people. Carrying by one person may cause back injury or injury by falling parts. Also, holding areas other than the bottom sur- face may cause pinching fingers between parts and injury by falling parts as well as damage to the instrument.
To avoid potential injury, hold the instrument in the proper position.
1 Fasten the clamping knob.
2 Hold the instrument body firmly at the specified positions and place it on the auto- matic instrument table.
For the automatic instrument table, see “OPTIONAL ACCESSORIES” on page 46.
Fixing knob |
|
Specified holding positions | Holding the instrument |
3 After installing the instrument, loosen the fixing knob. |
|
Now the body components can be moved. |
|
4 If the machine body is slightly off level, properly turn the adjusters at the four corners for fine adjustment.
Do not unscrew the adjusters more than 1cm.
13
PREPARATIONS