Machine-Side Hopper Loaders
2.1.3. Operation
To prevent injury and/or damage to equipment, observe the following safety rules:
•Appoint an equipment foreman to be responsible for the equipment.
•Ensure that the operating personnel are provided detailed instruction in the operation of the equipment.
•When the main switch is switched off for reasons pertaining to safety, it must be secured against unauthorized activation.
•Repair work may be carried out by trained personnel only.
•Never operate the equipment when partially dismantled.
•In case of malfunction, shut down the equipment immediately. Have malfunctions corrected immediately.
•The equipment is intended only for conveying granulated plastics and regrinds. Any other or additional use is contrary to specifications.
•This equipment is not suitable for food processing.
•The safety instructions of the connected machines must be followed.
•Explosive gases and mixtures of gas and air must not be conveyed.
2.1.4.Maintenance
To prevent injury and/or damage to equipment, observe the following safety rules:
•Before starting maintenance work, appoint a supervisor.
•Inform the responsible personnel before maintenance work on the system is started.
•Disconnect the equipment from main supply before starting maintenance procedures to ensure that it cannot be switched on unintentionally.
•All pipes, hoses and screwed connections should be checked regularly for leaks and damage. Any faults that arise should be corrected immediately.
•Depressurize all compressed air piping before starting maintenance work.