Shindaiwa 81646 manual Product Description, Specifications

Product Description

Using the accompanying illustrations as a guide, familiarize yourself with this unit and its various components. See Figure 4. Understanding your unit helps ensure top performance, long service life, and safer operation.

WARNING!

Do not make unauthorized modifica- tions or alterations to any of these units or their components.

T261 TRIMMER

				Spark Plug
			Throttle
			Interlock	Grip
			Ignition
			Switch
		Handle
	Outer Tube			Throttle	Fuel
					Tank
				Trigger
				T261X TRIMMER
Gearcase				Spark Plug
	Cutting
			Throttle
	Attachment Shield
			Interlock	Grip
			Ignition
			Switch
		Handle
Trimmer					Fuel
Head
	Outer Tube			Throttle	Tank
				Trigger
Gearcase		Barrier
		Bar
Trimmer	Cutting
Head	Attachment Shield

Figure 4

Specifications

T61 dry weight (less attachments)			1.8 lb./5.8 kg	Spark plug			Champion CJ8Y
T61X dry weight (less attachments)			13.1 lb./5.9 kg	Air cleaner type		Non-reversible heavy-duty filter element
Engine model			Shindaiwa S60C	Starting method			Recoil
Engine type	-cycle, catylist, vertical-cylinder , air cooled			Stopping method			Slide switch
Bore x stroke			1.3x1. in./3x30 mm	Transmission type			Automatic, centrifugal
Displacement			1.5 cu. in./4.1 cc				clutch w/bevel gear
Maximum power		1. HP/0.9 kW @ 7500 rpm (min-1)		EPA Emission Compliance Period**			.........................Category A
Fuel/oil ratio		50:1 with ISO-L-EGD or JASO FC		*	meets or exceeds these specifications and is
			class -cycle mixing oil*	recommended for all Shindaiwa products.
Carburetor type		TK DPN, diaphragm-type		** The EPA emission compliance referred to on the emission com-
				pliance label located on the engine, indicates the number of oper-
Fuel tank capacity		...............................................	4.3 oz./70 ml	ating hours for which the engine has been shown to meet Federal
Ignition		One-piece electronic transistor-controlled		emission requirements. Category C = 50 hours (Moderate), B =
				15 hours (Intermediate) and A = 300 hours (Extended).

Specifications are subject to change without notice.

5