Land Pride 357-044M manual Refer to -9& Figure Refer to Figure, Stop Handle, Height Adjusting Stop

Page 25

Land Pride

Section 3: Adjustments

Table of Contents

Refer to Figure 3-8:

5.Set cutting height at 3 1/4” on the height indicator by placing the height adjusting stop in the 3” hole, and turning the height adjustment stop so that the flat side is against the stop handle.

6.Clamp the height adjusting stop against the stop handle. This will assure that the height will not move during the setting process. Otherwise, spring pressure from the deck lift springs will tend to pull the stop away from the handle.

Stop Handle

Height Adjusting Stop

23626

5/16”

Adjuster Bolt

Jam Nut

Adjuster

Hardware

23626

Deck Level Adjustment (Right Side Shown)

Figure 3-10

Cutting Height (Right Side Shown)

Figure 3-8

Refer to Figure 3-9& Figure 3-10.

Refer to Figure 3-11:

8.Loosen the two nuts on the front of height indicator so that the foot pedal is free.

7.On both sides of the mower, loosen all nuts on the deck lift threaded rods and hardware on the adjuster until all deck lift chains are loose and the deck is sitting tightly on all three blocks.

Nuts

Deck Lift

 

Threaded Rod

Nuts

Foot

Pedal

Nut

Deck Lift

Block

Height

Indicator Rod

Nut

Deck Lift Chains

23626

Left Front

Deck Lift Chain

23690

Deck Level Adjustment (Right Side Shown)

Deck Lift Rod Adjustment (Left Side of Foot Pedal Shown)

Figure 3-9

Figure 3-11

2/27/07

Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Riding Mowers Accu-Z Razor Table of Contents Safety at All Times Keep Riders Off Machinery Practice Safe MaintenanceAvoid High Pressure Fluids Hazard Wear Protective Equipment Prepare for Emergencies838-815C 838-303C838-307C 838-308C 838-833C 838-310C 818-543C Application Using This ManualOwner Assistance Seat Assembly Control Lever AssemblyHitch Plate Assembly Uncrating InstructionsEngine Preparations Electrical Cable ConnectionRemove Mower From Crate Floor Razor Features Mower FeaturesMuffler Shield Is Located Under Engine Land PrideTable of Contents Left/Right Fuel Tank Valve Blade Engagement SwitchControl Levers Park LeverDeck Height Deck Lift Locking Pin Pedal Indicator Safety Start Interlock SystemEngine Starting Deck Lift PedalTo Decrease Speed or Stop Driving the MowerTo Start and Increase Speed SteeringFront of Mower Faces This Direction Moving Mower with Stalled EngineSteering Bypass Valve RodsSafe Operating Instructions Discharge Chute Mower Deck Operation Blade Engagement SwitchGeneral Operating Information BladeSteering Linkage Torque ValuesTorque Values FT lbsSteering Dampener Control Lever Neutral AdjustmentUpper Control Lever Adjustments Seat AdjustmentHeight Adjustment Reach AdjustmentEngine RPM Setting Hydro-Drive Belt AdjustmentDeck Drive Belt Adjustment Deck Leveling & Height AdjustmentAdjuster Bolt Jam Nut Hardware Height Adjusting StopRefer to -9& Figure Refer to Figure Stop HandleRefer to -10on Deck Lift Rod Adjustment Left Front Side ShownLift Anti-Scalp Rollers Deck Cutting Height AdjustmentPivot Front Wheels Refer to -12onDeck Bottom View Drive motors removed for clarity Maintenance LocationsService at Intervals Indicated Every Refer to Hours Maintenance ScheduleMaintenance Wiring Harness Fusses BatteryTires Electrical SystemHydraulic System Access to IZT Units Integrated Zero-Turn TransaxleHydraulic oil and Filter Refer to Refer to FigureFuel System Draining The Fuel Tank Fuel FilterEngine Oil and Oil Filter Oil Check, Honda EngineBelt Replacement General Engine MaintenanceDeck Belt Replacement Instructions Engine Air FilterDrive Belt Replacement Instructions Mower Blade MaintenanceBlade Inspection Refer to -11onRefer to -15and Figure Blade SharpeningPreparation of Engine for Storage StorageNew Season Preparation Hours Lubrication PointsCenter Blade Spindle Left Blade SpindleGauge Wheel Bearing Zerk 100/M HoursFront Axle Center Pivot Deck Lift Pivot PointsZ44 & Z52 Accu-Z Razor General Specifications Z44 & Z52 Accu-Z Razor Engine SpecificationsSpecifications to continue on next Engine TypeSafety Features Brake ServiceDeck Housing Depth IndicatorsZ44 & Z52 Accu-Z Razor Features BenefitsFor the operator Steering levers designed for Park lever to OFF Hydro-Gear IZTEngine Engine cranks but does not startEither direction OverheatingOne direction only Mower creeps when steering controlHydraulic system operates hot Levers are in neutralTire Inflation Chart Torque Values ChartAdditional Torque Values In-tpiBelts, blades, and tires are considered wear items WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

357-044M specifications

The Land Pride 357-044M is a cutting-edge implement designed to meet the needs of professionals and enthusiasts in the agricultural sector. Known for its robust construction and innovative features, this attachment is ideal for enhancing productivity in various land management tasks.

One of the main features of the Land Pride 357-044M is its heavy-duty design, which is specifically built to withstand the rigors of daily use in demanding environments. The durable frame ensures longevity, allowing operators to tackle tough soil conditions without worrying about equipment failure. Additionally, the implement is equipped with high-quality materials that resist wear and tear, providing peace of mind for long-term reliability.

The 357-044M shines in its versatility. It can be used for a variety of applications, such as leveling ground, grading, and even snow removal in winter months. With adjustable features, operators can easily modify the attachment to suit specific job requirements, making it a multi-functional tool for land preparation.

Equipped with advanced technologies, the Land Pride 357-044M includes precision-engineered components that optimize performance. The attachment’s unique blade design enhances soil mixing and aeration, leading to improved crop yields. Furthermore, the implement's innovative hydraulic system allows for smooth and efficient operation, ensuring that the tool can be adapted to different tasks with minimal effort.

Operator comfort and efficiency are also key characteristics of the 357-044M. The implement features user-friendly controls, making it easy to operate even for those who may be unfamiliar with such equipment. The design takes into account ease of attachment and detachment from various tractors, promoting a seamless workflow on the job site.

In summary, the Land Pride 357-044M is a versatile and dependable implement that combines a robust design, innovative technologies, and operator-friendly features. Its ability to perform multiple tasks makes it an essential addition to any agricultural operation. With a focus on durability and efficiency, this attachment is sure to stand the test of time while delivering the performance that land management professionals demand.
Top Page Image Contents