Fuel System

Land PrideTable of Contents

Section 4: Maintenance & Lubrication

3.Clean the exterior of the unit of any debris before removing the oil filter and magnetic plug.

4.Remove oil filter from underside of pump with 3/8” allen wrench and allow oil to drain completely.

IMPORTANT: The filter is plastic, excessive torque will damage filter.

5.Torque bypass filter to 20-50 in-lbs. (2-6 Nm)

6.Wipe off excess oil from case.

7.Optional: Replace 9/16” magnetic plug with newly supplied 9/16” magnetic plug.

8.Lower mower safely to the ground.

9.Remove breather assembly located on top of pump and add 20W-50 Mobil oil.

10.Check oil level. Oil level should be 1 7/8” from top of case port.

11.Reinstall breather assembly into case port

12.Wipe off excess oil. A degreaser may need to be used to remove excess oil.

•Store gasoline in an approved container and keep it out of children’s reach.

•Never buy more than a 30 day supply of gasoline.

•Do not ﬁll gasoline containers inside a vehicle, on a truck, or on a trailer. Interior carpets and plastic truck bed liners insulate the container and slow loss of static charge.

•When practical, remove equipment from the truck or trailer and refuel the equipment with its wheels on the ground. If this is not possible, then refuel the equipment on the truck or trailer using a portable container and not a gasoline dispenser nozzle. If a gasoline dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.

•Gasoline is a poison harmful or fatal if swallowed.

•Long-term exposure to vapors can cause serious injury and illness.

•Avoid prolonged breathing of vapors.

•Keep face away from nozzle and gas tank opening.

•Keep gas away from eyes and skin.

The fuel tanks are located in the mower’s fenders. Total capacity for the fuel tanks is 12 U.S. gallon.

!DANGER

•Replacement of fuel system parts (i.e. gas caps, hoses, fuel tanks, fuel filters, etc.) must be the same as original parts. Fire and/or explosion can occur if not followed.

•Observe safe fuel handling precautions.

•Do not smoke while handling fuel.

•Do not ﬁll tank with engine running or while engine is hot. Allow the engine to cool before ﬁlling. Spilling fuel over the engine, mufﬂer, or a hot object may result in a ﬁre or explosion.

•Allow engine to cool before servicing the fuel system.

•Do not fill fuel tanks to the top if mowing on hilly terrain or in hot weather. Gas can rise up to the fuel cap vent hole and seep out.

•Clean up any gasoline spills immediately.

•Keep fuel away from open ﬂame or spark.

•Store the mower away from open ﬂame or spark if there is fuel in the tank.

•Use extra caution when handling gasoline and other fuels. They are ﬂammable and vapors are explosive. A ﬁre or explosion from gasoline can burn you and others and can damage property.

•Refuel outdoors preferably, or in well ventilated areas.

•Never attempt to start engine when there is a strong odor of gasoline fumes present. Locate and correct cause.

When filling the fuel tanks, disengage blade engagement switch, place control levers in park position, set park to (ON) and stop engine. Allow engine to cool before filling the tanks.

Clean dirt from around fuel tank cap, remove cap and begin filling. Do not fill fuel tanks to the top if mowing on hilly terrain or in hot weather. Gas can rise up to the fuel cap vent hole and seep out. When finished, screw cap back on securely and wipe up any spilled gasoline. Use regular unleaded gasoline with an octane rating of 87 or higher.

IMPORTANT: Never use methanol, gasoline containing more than 10% ethanol because the fuel system could be damaged. Do not mix oil with gasoline.

Using a fuel stabilizer/conditioner in the fuel can provide benefits such as:

1.Keeps gasoline fresh during storage of 90 days or less. For longer storage, drain the fuel tanks.

2.Cleans the engine during operation.

3.Eliminates gum-like varnish build-up in the fuel system.

IMPORTANT: Do not use fuel additives containing methanol or ethanol.

Add the correct amount of gas stabilizer/conditioner to the gas. Follow the gas stabilizer/conditioner manufacturer’s directions for best results.

2/27/07

Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M

357-044M specifications

The Land Pride 357-044M is a cutting-edge implement designed to meet the needs of professionals and enthusiasts in the agricultural sector. Known for its robust construction and innovative features, this attachment is ideal for enhancing productivity in various land management tasks.

One of the main features of the Land Pride 357-044M is its heavy-duty design, which is specifically built to withstand the rigors of daily use in demanding environments. The durable frame ensures longevity, allowing operators to tackle tough soil conditions without worrying about equipment failure. Additionally, the implement is equipped with high-quality materials that resist wear and tear, providing peace of mind for long-term reliability.

The 357-044M shines in its versatility. It can be used for a variety of applications, such as leveling ground, grading, and even snow removal in winter months. With adjustable features, operators can easily modify the attachment to suit specific job requirements, making it a multi-functional tool for land preparation.

Equipped with advanced technologies, the Land Pride 357-044M includes precision-engineered components that optimize performance. The attachment’s unique blade design enhances soil mixing and aeration, leading to improved crop yields. Furthermore, the implement's innovative hydraulic system allows for smooth and efficient operation, ensuring that the tool can be adapted to different tasks with minimal effort.

Operator comfort and efficiency are also key characteristics of the 357-044M. The implement features user-friendly controls, making it easy to operate even for those who may be unfamiliar with such equipment. The design takes into account ease of attachment and detachment from various tractors, promoting a seamless workflow on the job site.

In summary, the Land Pride 357-044M is a versatile and dependable implement that combines a robust design, innovative technologies, and operator-friendly features. Its ability to perform multiple tasks makes it an essential addition to any agricultural operation. With a focus on durability and efficiency, this attachment is sure to stand the test of time while delivering the performance that land management professionals demand.