Land Pride 357-044M manual Practice Safe Maintenance, Keep Riders Off Machinery

Page 4

Table of Contents

Important Safety Information

Land Pride

These are common practices that may or may not be applicable to the products described in this manual.

Practice Safe Maintenance

▲Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information.

▲Work in a clean dry area.

▲Put mower in park, turn off engine, and remove key before performing maintenance.

▲Allow mower to cool completely before performing maintenance..

▲Do not grease or oil mower while in operation.

▲Inspect all parts. Make sure parts are in good condition and installed properly.

▲Remove buildup of grease, oil or debris.

▲Remove all tools and unused parts from mower before operation.

Keep Riders

Off Machinery

▲Riders obstruct the operator’s view, they could be struck by foreign objects or thrown from the machine.

▲Never allow children under 16 years of age to operate equipment.

Avoid High

Pressure Fluids Hazard

▲Escaping fluid under pressure can penetrate the skin causing serious injury.

▲Avoid the hazard by relieving pressure before disconnecting hydraulic lines.

▲Use a piece of paper or cardboard, NOT BODY PARTS, to check for suspected leaks.

▲Wear protective gloves and safety glasses or goggles when working with hydraulic systems.

▲If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a few hours or gangrene may result.

2

Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M

2/27/07

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Riding Mowers Accu-Z Razor Table of Contents Safety at All Times Keep Riders Off Machinery Practice Safe MaintenanceAvoid High Pressure Fluids Hazard Prepare for Emergencies Wear Protective Equipment838-303C 838-815C838-307C 838-308C 838-833C 838-310C 818-543C Application Using This ManualOwner Assistance Control Lever Assembly Seat AssemblyHitch Plate Assembly Uncrating InstructionsEngine Preparations Electrical Cable ConnectionRemove Mower From Crate Floor Razor Features Mower FeaturesMuffler Shield Is Located Under Engine Land PrideTable of Contents Blade Engagement Switch Left/Right Fuel Tank ValveControl Levers Park LeverSafety Start Interlock System Deck Height Deck Lift Locking Pin Pedal IndicatorEngine Starting Deck Lift PedalDriving the Mower To Decrease Speed or StopTo Start and Increase Speed SteeringMoving Mower with Stalled Engine Front of Mower Faces This DirectionSteering Bypass Valve RodsSafe Operating Instructions Discharge Chute Blade Engagement Switch Mower Deck OperationGeneral Operating Information BladeTorque Values Steering LinkageTorque Values FT lbsControl Lever Neutral Adjustment Steering DampenerSeat Adjustment Upper Control Lever AdjustmentsHeight Adjustment Reach AdjustmentHydro-Drive Belt Adjustment Engine RPM SettingDeck Drive Belt Adjustment Deck Leveling & Height AdjustmentHeight Adjusting Stop Adjuster Bolt Jam Nut HardwareRefer to -9& Figure Refer to Figure Stop HandleRefer to -10on Deck Lift Rod Adjustment Left Front Side ShownLift Deck Cutting Height Adjustment Anti-Scalp RollersPivot Front Wheels Refer to -12onMaintenance Locations Deck Bottom View Drive motors removed for clarityMaintenance Schedule Service at Intervals Indicated Every Refer to HoursMaintenance Battery Wiring Harness FussesTires Electrical SystemAccess to IZT Units Integrated Zero-Turn Transaxle Hydraulic SystemHydraulic oil and Filter Refer to Refer to FigureFuel System Fuel Filter Draining The Fuel TankEngine Oil and Oil Filter Oil Check, Honda EngineGeneral Engine Maintenance Belt ReplacementDeck Belt Replacement Instructions Engine Air FilterMower Blade Maintenance Drive Belt Replacement InstructionsBlade Inspection Refer to -11onBlade Sharpening Refer to -15and FigurePreparation of Engine for Storage StorageNew Season Preparation Lubrication Points HoursCenter Blade Spindle Left Blade Spindle100/M Hours Gauge Wheel Bearing ZerkFront Axle Center Pivot Deck Lift Pivot PointsZ44 & Z52 Accu-Z Razor Engine Specifications Z44 & Z52 Accu-Z Razor General SpecificationsSpecifications to continue on next Engine TypeBrake Service Safety FeaturesDeck Housing Depth IndicatorsFeatures Benefits Z44 & Z52 Accu-Z RazorFor the operator Steering levers designed for Park lever to OFF Hydro-Gear IZTEngine cranks but does not start EngineEither direction OverheatingMower creeps when steering control One direction onlyHydraulic system operates hot Levers are in neutralTorque Values Chart Tire Inflation ChartAdditional Torque Values In-tpiWarranty Belts, blades, and tires are considered wear itemsCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

357-044M specifications

The Land Pride 357-044M is a cutting-edge implement designed to meet the needs of professionals and enthusiasts in the agricultural sector. Known for its robust construction and innovative features, this attachment is ideal for enhancing productivity in various land management tasks.

One of the main features of the Land Pride 357-044M is its heavy-duty design, which is specifically built to withstand the rigors of daily use in demanding environments. The durable frame ensures longevity, allowing operators to tackle tough soil conditions without worrying about equipment failure. Additionally, the implement is equipped with high-quality materials that resist wear and tear, providing peace of mind for long-term reliability.

The 357-044M shines in its versatility. It can be used for a variety of applications, such as leveling ground, grading, and even snow removal in winter months. With adjustable features, operators can easily modify the attachment to suit specific job requirements, making it a multi-functional tool for land preparation.

Equipped with advanced technologies, the Land Pride 357-044M includes precision-engineered components that optimize performance. The attachment’s unique blade design enhances soil mixing and aeration, leading to improved crop yields. Furthermore, the implement's innovative hydraulic system allows for smooth and efficient operation, ensuring that the tool can be adapted to different tasks with minimal effort.

Operator comfort and efficiency are also key characteristics of the 357-044M. The implement features user-friendly controls, making it easy to operate even for those who may be unfamiliar with such equipment. The design takes into account ease of attachment and detachment from various tractors, promoting a seamless workflow on the job site.

In summary, the Land Pride 357-044M is a versatile and dependable implement that combines a robust design, innovative technologies, and operator-friendly features. Its ability to perform multiple tasks makes it an essential addition to any agricultural operation. With a focus on durability and efficiency, this attachment is sure to stand the test of time while delivering the performance that land management professionals demand.
Top Page Image Contents