Land Pride 357-044M Ground Speed, Steering Type, Twin Lever Steering Controls, Brake Service

Page 42

Table of Contents

Section 5: Specifications & Capacities

Land Pride

Z44 & Z52 Accu-Z Razor® (General Specifications)

 

Z44

 

Z52

Ground Speed

 

Forward: 0-7 MPH

 

 

Reverse: 0-5 MPH

Steering Type

Twin lever steering provides independent control of each drive wheel.

Twin Lever Steering Controls

Speed, forward, reverse, brake, and turns.

Steering Turning Radius

True zero degree. Turns with counter-rotating independent drive wheels

Brake Service

Hydrostatic dynamic braking

Parking

Lever applied pawl and cog wheel

Mower Drive

Single V-belt with electric clutch and spring tension idler pulley

Safety Features

Operator presence system connected to deck and drive clutches.

Seat

Molded-vinyl seat. Bolt loosening required for forward and reverse adjustments.

 

Optional armrests kit for standard molded-vinyl seat.

 

Optional deluxe cushion seat with arm rests.

Mainframe Construction

1 1/2" square solid steel.

Drive Motor Mount

 

1/8” welded steel

Front Caster Wheels

Mounted with roller bearings on each wheel.

Front Caster Forks

 

3/8” steel.

Deck Thickness

11 Gauge decks with reinforcements welded into spindle mount areas

Box-Section Reinforced Front

11 GA. x 3 1/2" x 1 1/2” Box

Edge

 

 

 

Deck Trim Edges

Solid 1” x 3/8” steel bars for reinforced impact area

Deck Housing Depth

4 1/8” deep, (room for high-capacity mowing)

Deck Lift

Foot-operated deck height adjustment.

 

Pin for setting height and transport position.

Hand Operated Controls

Ignition switch, throttle lever, control levers, blade engagement switch,

 

choke lever and Left/Right Fuel Tank Valve.

Indicators

Engine warning light and hour meter

Cup Holder

Two cup holders molded into the left side fuel tank.

 

Accommodates nearly any cup size including Big Gulp.

Cutting Heights

Foot-operated deck height adjustment. Pin for setting height, transport position.

 

Height adjustment in 1/4" increments from 1 1/2” to 4 1/2”

Mowing Blades

Heavy-duty, heat-treated, high-lift steel blades

 

 

 

 

 

.20" x 2 1/2" x 15.81"

 

.20 x 2 1/2” x 17.81”

Blade Tip Speed

16,811 FPM

 

18,937 FPM

Blade Drive

V-belt drive to all three spindles. Spring tension idler pulleys.

Spindles

Machine ductile housing, 1" diameter high carbon steel shafts

 

and greasable ball bearings.

Flotation

Free-floating mower using three blades with center blade to the front.

 

Mower is suspended at the four corners on spring-assisted chains.

 

Includes 4 anti-scalp wheels to improve flotation in rolling and uneven terrain.

 

 

 

 

40 Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M

2/27/07

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Riding Mowers Accu-Z Razor Table of Contents Safety at All Times Practice Safe Maintenance Keep Riders Off MachineryAvoid High Pressure Fluids Hazard Prepare for Emergencies Wear Protective Equipment838-303C 838-815C838-307C 838-308C 838-833C 838-310C 818-543C Using This Manual ApplicationOwner Assistance Hitch Plate Assembly Control Lever AssemblySeat Assembly Uncrating InstructionsElectrical Cable Connection Engine PreparationsRemove Mower From Crate Floor Mower Features Razor FeaturesMuffler Shield Is Located Under Engine Land PrideTable of Contents Control Levers Blade Engagement SwitchLeft/Right Fuel Tank Valve Park LeverEngine Starting Safety Start Interlock SystemDeck Height Deck Lift Locking Pin Pedal Indicator Deck Lift PedalTo Start and Increase Speed Driving the MowerTo Decrease Speed or Stop SteeringSteering Moving Mower with Stalled EngineFront of Mower Faces This Direction Bypass Valve RodsSafe Operating Instructions Discharge Chute General Operating Information Blade Engagement SwitchMower Deck Operation BladeTorque Values Torque ValuesSteering Linkage FT lbsControl Lever Neutral Adjustment Steering DampenerHeight Adjustment Seat AdjustmentUpper Control Lever Adjustments Reach AdjustmentDeck Drive Belt Adjustment Hydro-Drive Belt AdjustmentEngine RPM Setting Deck Leveling & Height AdjustmentRefer to -9& Figure Refer to Figure Height Adjusting StopAdjuster Bolt Jam Nut Hardware Stop HandleDeck Lift Rod Adjustment Left Front Side Shown Refer to -10onLift Pivot Front Wheels Deck Cutting Height AdjustmentAnti-Scalp Rollers Refer to -12onMaintenance Locations Deck Bottom View Drive motors removed for clarityMaintenance Schedule Service at Intervals Indicated Every Refer to HoursMaintenance Tires BatteryWiring Harness Fusses Electrical SystemHydraulic oil and Filter Access to IZT Units Integrated Zero-Turn TransaxleHydraulic System Refer to Refer to FigureFuel System Engine Oil and Oil Filter Fuel FilterDraining The Fuel Tank Oil Check, Honda EngineDeck Belt Replacement Instructions General Engine MaintenanceBelt Replacement Engine Air FilterBlade Inspection Mower Blade MaintenanceDrive Belt Replacement Instructions Refer to -11onBlade Sharpening Refer to -15and FigureStorage Preparation of Engine for StorageNew Season Preparation Center Blade Spindle Lubrication PointsHours Left Blade SpindleFront Axle Center Pivot 100/M HoursGauge Wheel Bearing Zerk Deck Lift Pivot PointsSpecifications to continue on next Z44 & Z52 Accu-Z Razor Engine SpecificationsZ44 & Z52 Accu-Z Razor General Specifications Engine TypeDeck Housing Depth Brake ServiceSafety Features IndicatorsFor the operator Steering levers designed for Features BenefitsZ44 & Z52 Accu-Z Razor Park lever to OFF Hydro-Gear IZTEither direction Engine cranks but does not startEngine OverheatingHydraulic system operates hot Mower creeps when steering controlOne direction only Levers are in neutralAdditional Torque Values Torque Values ChartTire Inflation Chart In-tpiWarranty Belts, blades, and tires are considered wear itemsCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

357-044M specifications

The Land Pride 357-044M is a cutting-edge implement designed to meet the needs of professionals and enthusiasts in the agricultural sector. Known for its robust construction and innovative features, this attachment is ideal for enhancing productivity in various land management tasks.

One of the main features of the Land Pride 357-044M is its heavy-duty design, which is specifically built to withstand the rigors of daily use in demanding environments. The durable frame ensures longevity, allowing operators to tackle tough soil conditions without worrying about equipment failure. Additionally, the implement is equipped with high-quality materials that resist wear and tear, providing peace of mind for long-term reliability.

The 357-044M shines in its versatility. It can be used for a variety of applications, such as leveling ground, grading, and even snow removal in winter months. With adjustable features, operators can easily modify the attachment to suit specific job requirements, making it a multi-functional tool for land preparation.

Equipped with advanced technologies, the Land Pride 357-044M includes precision-engineered components that optimize performance. The attachment’s unique blade design enhances soil mixing and aeration, leading to improved crop yields. Furthermore, the implement's innovative hydraulic system allows for smooth and efficient operation, ensuring that the tool can be adapted to different tasks with minimal effort.

Operator comfort and efficiency are also key characteristics of the 357-044M. The implement features user-friendly controls, making it easy to operate even for those who may be unfamiliar with such equipment. The design takes into account ease of attachment and detachment from various tractors, promoting a seamless workflow on the job site.

In summary, the Land Pride 357-044M is a versatile and dependable implement that combines a robust design, innovative technologies, and operator-friendly features. Its ability to perform multiple tasks makes it an essential addition to any agricultural operation. With a focus on durability and efficiency, this attachment is sure to stand the test of time while delivering the performance that land management professionals demand.
Top Page Image Contents