Land Pride 357-044M manual Uncrating Instructions, Control Lever Assembly, Seat Assembly

Page 10

Table of Contents

Section 1: Assembly & Set-up

Uncrating Instructions

The crate is assembled with wire clips. The mower frame is banded to the crate floor.

1.First remove the top panel by prying the wire clips free with a pry bar. Then remove the side panels in the same way.

2.Cut metal bands securing front wheels to the crate floor. Discard bands.

Control Lever Assembly

Refer to Figure 1-1:

Control levers (#1) are factory shipped rotated down and secured with plastic ties.

IMPORTANT: Be careful not to cut the seat cover when removing packing material around the seat. Cutting the seat cover will void its warranty.

1.Being careful not cut control lever handles, cut plastic ties securing the control levers (#1).

2.Rotate control levers (#1) up until the bolt holes align. Install bolts (#3) and nuts (#2) as shown.

3.Align control lever handles with each other and tighten nuts (#2).

NOTE: See "Upper Control Lever Adjustments" on page 21 for final adjustments to the control levers.

Seat Assembly

Refer to Figure 1-1:

1.The seat (#4) is factory mounted to the hinged seat platform (#5). Cut plastic ties securing the seat platform to the crate frame.

2.Spread control levers (#1) fully apart before attaching the seat platform (#5) to the mower frame.

IMPORTANT: The arm rests on the Deluxe Seat must be pivoted up when attaching the seat platform to the mower deck. Leaving arm rests down while attaching the seat platform can cut the arm rest covers and void the warranty.

3.Pivot the arm rest on the Deluxe Seat up.

4.Mount seat platform to the hinge tabs at the front with two 5/16”-18 x 5/8” lg. GR5 bolts (#6) and two 5/16” flange hex locknuts (#7). Tighten nuts snugly to remove all play and then back nuts up one-quarter turn.

5.Connect switch wires on the mower to the seat switch located under the seat.

6.Hinge the seat platform down and secure in place with two 5/16"-18 x 3/4" lg. phillips head machine screws (#8).

7.The seat platform is slotted so the seat can be adjusted to fit the operator. See "Seat Adjustment" on page 21 for positioning.

23623

Control Lever & Seat Assembly

(Standard Seat Assembly Shown)

Figure 1-1

Hitch Plate Assembly

Refer to Figure 1-2:

A hitch plate (#1) is supplied with the mower and is shipped packaged with the manual.

1.Remove two 5/16"-18 x 5/8" GR5 hex flange screws (#2) located under the bumper.

2.Install hitch plate (#1) as shown with existing 5/16"-18 x 5/8" GR5 hex head flange screws.

3.Tighten 5/16" hex head flange screws (#2) to 17 ft. lbs. of torque.

23624

Hitch Plate Assembly

Figure 1-2

8

Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M

2/27/07

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Riding Mowers Accu-Z Razor Table of Contents Safety at All Times Keep Riders Off Machinery Practice Safe MaintenanceAvoid High Pressure Fluids Hazard Prepare for Emergencies Wear Protective Equipment838-303C 838-815C838-307C 838-308C 838-833C 838-310C 818-543C Application Using This ManualOwner Assistance Hitch Plate Assembly Control Lever AssemblySeat Assembly Uncrating InstructionsEngine Preparations Electrical Cable ConnectionRemove Mower From Crate Floor Razor Features Mower FeaturesMuffler Shield Is Located Under Engine Land PrideTable of Contents Control Levers Blade Engagement SwitchLeft/Right Fuel Tank Valve Park LeverEngine Starting Safety Start Interlock SystemDeck Height Deck Lift Locking Pin Pedal Indicator Deck Lift PedalTo Start and Increase Speed Driving the MowerTo Decrease Speed or Stop SteeringSteering Moving Mower with Stalled EngineFront of Mower Faces This Direction Bypass Valve RodsSafe Operating Instructions Discharge Chute General Operating Information Blade Engagement SwitchMower Deck Operation BladeTorque Values Torque ValuesSteering Linkage FT lbsControl Lever Neutral Adjustment Steering DampenerHeight Adjustment Seat AdjustmentUpper Control Lever Adjustments Reach AdjustmentDeck Drive Belt Adjustment Hydro-Drive Belt AdjustmentEngine RPM Setting Deck Leveling & Height AdjustmentRefer to -9& Figure Refer to Figure Height Adjusting StopAdjuster Bolt Jam Nut Hardware Stop HandleRefer to -10on Deck Lift Rod Adjustment Left Front Side ShownLift Pivot Front Wheels Deck Cutting Height AdjustmentAnti-Scalp Rollers Refer to -12onMaintenance Locations Deck Bottom View Drive motors removed for clarityMaintenance Schedule Service at Intervals Indicated Every Refer to HoursMaintenance Tires BatteryWiring Harness Fusses Electrical SystemHydraulic oil and Filter Access to IZT Units Integrated Zero-Turn TransaxleHydraulic System Refer to Refer to FigureFuel System Engine Oil and Oil Filter Fuel FilterDraining The Fuel Tank Oil Check, Honda EngineDeck Belt Replacement Instructions General Engine MaintenanceBelt Replacement Engine Air FilterBlade Inspection Mower Blade MaintenanceDrive Belt Replacement Instructions Refer to -11onBlade Sharpening Refer to -15and FigurePreparation of Engine for Storage StorageNew Season Preparation Center Blade Spindle Lubrication PointsHours Left Blade SpindleFront Axle Center Pivot 100/M HoursGauge Wheel Bearing Zerk Deck Lift Pivot PointsSpecifications to continue on next Z44 & Z52 Accu-Z Razor Engine SpecificationsZ44 & Z52 Accu-Z Razor General Specifications Engine TypeDeck Housing Depth Brake ServiceSafety Features IndicatorsFor the operator Steering levers designed for Features BenefitsZ44 & Z52 Accu-Z Razor Park lever to OFF Hydro-Gear IZTEither direction Engine cranks but does not startEngine OverheatingHydraulic system operates hot Mower creeps when steering controlOne direction only Levers are in neutralAdditional Torque Values Torque Values ChartTire Inflation Chart In-tpiWarranty Belts, blades, and tires are considered wear itemsCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

357-044M specifications

The Land Pride 357-044M is a cutting-edge implement designed to meet the needs of professionals and enthusiasts in the agricultural sector. Known for its robust construction and innovative features, this attachment is ideal for enhancing productivity in various land management tasks.

One of the main features of the Land Pride 357-044M is its heavy-duty design, which is specifically built to withstand the rigors of daily use in demanding environments. The durable frame ensures longevity, allowing operators to tackle tough soil conditions without worrying about equipment failure. Additionally, the implement is equipped with high-quality materials that resist wear and tear, providing peace of mind for long-term reliability.

The 357-044M shines in its versatility. It can be used for a variety of applications, such as leveling ground, grading, and even snow removal in winter months. With adjustable features, operators can easily modify the attachment to suit specific job requirements, making it a multi-functional tool for land preparation.

Equipped with advanced technologies, the Land Pride 357-044M includes precision-engineered components that optimize performance. The attachment’s unique blade design enhances soil mixing and aeration, leading to improved crop yields. Furthermore, the implement's innovative hydraulic system allows for smooth and efficient operation, ensuring that the tool can be adapted to different tasks with minimal effort.

Operator comfort and efficiency are also key characteristics of the 357-044M. The implement features user-friendly controls, making it easy to operate even for those who may be unfamiliar with such equipment. The design takes into account ease of attachment and detachment from various tractors, promoting a seamless workflow on the job site.

In summary, the Land Pride 357-044M is a versatile and dependable implement that combines a robust design, innovative technologies, and operator-friendly features. Its ability to perform multiple tasks makes it an essential addition to any agricultural operation. With a focus on durability and efficiency, this attachment is sure to stand the test of time while delivering the performance that land management professionals demand.
Top Page Image Contents