HOMELITE EL18B
ELECTRIC CHAINSAW
!WARNINGS
IMPORTANT: Read and under- stand all Safety Warnings on pages 2 through 4. Improper use of this chain saw can cause se- vere injury or death from fi re, elec- trical shock, body contact with moving chain, or falling wood.
MAINTENANCE AND STORAGE OF CHAIN SAW
placement parts.
5.Always store chain saw
•in a high or locked place, out of children’s reach
•in a dry place
•in a carrying case or with scabbard over guide bar
Keep this manual for reference. It is your guide to safe and proper operation of this chain saw.
UNPACKING
1.Remove all items from carton.
2.Check all items for any shipping dam- age. If you find any damage or if any parts are missing, promptly inform dealer where you bought chain saw.
1.Unplug chain saw from power source
•when not in use
•before moving from one place to an- other
•before servicing
•before changing accessories or at- tachments
2.Inspect chain saw before and after each use. Check saw closely if guard or other part has been damaged. Check for any damage that may affect operator safety or operation of saw. Check for align- ment or binding of moving parts. Check that switch turns motor on and off. Check chain brake. Check for broken or damaged parts. Do not use chain saw if damage affects safety or operation. Have damage repaired by authorized service person.
3.Maintain chain saw with care.
•Never expose saw to rain.
•Keep chain sharp, clean, and lubri- cated.
•Follow steps outlined in this manual to sharpen chain.
•Keep handles dry, clean, and free of oil.
•Keep all screws and nuts tight.
•Inspect power cord often. If dam- aged, have repaired by authorized service person.
•Never carry chain saw by power cord.
•Never yank power cord to unplug it.
•Keep power cord from heat, oil, and sharp edges.
•Inspect extension cords often and replace if damaged.
4.When servicing, use only identical re-
PRODUCT IDENTIFICATION
Front Hand Guard/Chain Brake | Safe•T•Tip® |
| |
| Device |
| Saw |
Chain
Rear
Handle
Guide Bar
Spike
Rear Hand
Guard
Power Cord
Oil Level Sight Hole (located on saw body, hidden by front handle)
Oil Cap
Switch
Lockout
Front
Handle
Motor
Housing
Trigger
Figure 2 - Electric Chain Saw
4 | 101473 |