®3
Operation Home-Safe® Program
The
To enter the
1)To operate the lights and fan for Home Safe Program – Press the 
But- ton off for a least 5 seconds.
2)Turn the 
on. Immediately press the buttons in the following sequence: 
+ 
+ 
+
. A series of tones will be heard through the
3)The lights will automatically cycled on and off in a controlled sequence as fol- lows: ON 1 hour, OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then OFF 2 hours. This seven hour pattern will repeat continuously so that a different pattern of lighting is seen each day of the week.
4) To cancel the | Button OFF for five |
seconds. |
|
Operation Fan-Minder™ Program
The
1.Turn the 
OFF for at least 5 seconds.
2.Turn the 
ON.
3.Immediately operate the buttons in the following sequence:
+ 
+
+ 
4.The fan will respond with three descending tones. A timer is now initiated and the fan will reduce one speed for each
5.You may increase the fan speed by pressing and holding the 
button until the desired speed is reached, then release it. The fan will again reduce one speed for each 2 hour interval.
5. To cancel the 
OFF for three seconds.
29