Casablanca Fan Company C31UxxZ Care Recommendations, Product Specifications, Fan Finishes, Blades

Page 36
Care Recommendations

Care Recommendations

Fan Finishes

For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish.

A vacuum cleaner brush nozzle can remove heavier dust.

Surface smudges or an accumulation of dirt and dust can be removed easily using a mild detergent and slightly dampened soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these will damage the finish.

Blades

Wood-finish blades should be cleaned with a furniture polishing cloth. Occasionally, a light coat of furniture polish may be applied for added protection and beauty.

For painted and high-gloss blades, surface smudges or an accumulation of dirt and dust can be removed easily using a mild detergent and slightly dampened soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these will damage the finish.

No Need for Lubrication

Never lubricate this fan! The precision motor at the heart of your Casablanca fan features sealed bearings that are lubricated for life.

Do not attempt to oil the motor.

Changing Lightbulbs

Be sure to turn the power to OFF at the wall switch or circuit breaker before changing lightbulbs.

Replace bulbs with the same type as you removed from the light fixture.

For questions or to locate the nearest Casablanca Authorized Service Center

call toll free: 1-888-227-2178

or visit us on the web at: www.casablancafanco.com

Model Name:

Holliston

Model Number:

C31UxxZ

Dimensions:

A =

12"

 

B =13.5"

 

C =

3"

 

D =13.9"

 

E =

7"

Weight:

26 lbs.

Product Specifications

Motor:

XLP Plus

Blade Span:

60"

Blade Iron Pitch:

15°

No. of Blades:

5

Technology:

Inteli-Touch® 3 W-84

Lightbulbs:

(6) 7-Watt C7

Airflow:

6495 cfm

Electricity Use:

115 watts

Airflow Efficiency: 56.5 cfm/watt

34

Image 36
Contents PN C3143001-AT0209 HollistonC31UxxZ O W N E R ’ S M A N U A LProof of Purchase LIMITED WARRANTYTHIS WARRANTY SUPERSEDES ALL HollistonPREVIOUS WARRANTIES CONTENTS HollistonRead and Save These Instructions PN C3143001 AT0608SERIAL No. DJ06 MODEL # C31UxxZHolliston TYPEParts Guide 7-Watt IncandescentUplight Bulbs Blade Iron Screws pre-installed, see pg 13, step 9a Adaptor AssemblySwitch Housing Cap Switch Housing Cap Screws 8-32 x 3/8For best performance and for your warranty to be valid use only genuine Casablanca blades, light fixtures, and accessoriesIntroduction Before You Start Safe Usesloped ceiling installations When to Use Extension PolesMOUNTING RECOMMENDATIONS General Guidelines Calculation of Ceiling AngleFan Installation Getting Started Ceiling plate InstallationInstalling a New Ceiling Fixture Outlet Box Using Existing Ceiling Fixture Outlet BoxLag Screw Installation Canopy InstallationCANOPY LOCK WASHERS CANOPY SCREWS IMPORTANT SAFETY INFORMATION Prepare for fan installation as followsFan Preparation Figure #1 Figure #2Fan Preparation - continued Figure #4Figure #5 LIGHTBULB INSTALLATION uplight Install LightbulbsHanging the Fan Figure #6Canopy Hatch and cover ring Installation Canopy Electrical ConnectionsFigure #2 Blade Installation Blade InstallationAttach Blade Irons LIGHT FIXTURE Installation optional Blade Installation ContinuedBlade screws must be tightened securely before operating the fanswitch housing and end cap Installation NO LIGHT KIT - InstallationLight Kit Adaptor Disassembly Switch Housing and Light Kit Adaptor Installation - NO LIGHT KIT Switch Housing and Light Kit Adaptor Installation - Continued NO LIGHT KITAdaptor Installation NO LIGHT KIT - END SCREW Figure #6LIGHT KIT - Installation Switch Housing and Light Kit Adaptor Installation - Continued LIGHT KITFigure #9 Figure #10 Figure #11Figure #12 Figure #14Figure #15 Figure #16Figure #17 W-84 WALL CONTROL INSTALLATION Prepare for W-84 Wall Control Bezel replacement as followsW-84 Wall control Preparation For use on product with BOTH UP and DOWN LIGHTS ONLYPrepare for W-84 Wall Control installation - Continued PINSRUBBER KEY PAD ALMONDw-84 Control INSTALLATION Installing the W-84 Wall Control single W-84 InstallationW-84 Wall Control dual W-84 Installation DIP SWITCHESNEUTRAL Operation Power Make sure where you are in the sequence to the rightOperation Speed Control Operation Reversing Airflowchanging frequency setting To dim just the up lightTo dim just the down light NOTE All fans leave the factory set to “1111”Automatic Demonstration Program ++++Operation Safe-Exit and light-minder Program To enter the demonstration programOperation Home-Safe Program Operation Fan-Minder Program+ + + In the wall bezel replacement W-84 Wall Control Bezel replacement CONTINUED BEZEL BEZEL TABS BEZEL ALIGNMENT PIN AND HOLE ALMOND COLORED BEZELALMOND WALL PLATE SCREWS ALMOND COLORED WALL PLATE Troubleshooting tips Product Specifications DimensionsWeight Care RecommendationsHolliston