Casablanca Fan Company C31UxxZ owner manual Lag Screw Installation, Canopy Installation

Lag Screw Installation

NOTE: This step is required only under two conditions: If the fan weighs 36 lbs. or more or if the existing ceiling fixture outlet box needs to be modified for a ceiling fan application (for example, if the house is not new construction and you are replacing an existing light fixture). We recommend that the ceiling box be of sufficient capacity to support the weight of the fan and light fixture under any conditions. If in doubt whether you need to install the lag screw, consult a qualified electrician.

Step 2. With the large washer attached, pass the lag screw through the center hole of the ceiling plate and screw into the guide hole. Tighten until the outlet box is mounted firmly to the beam. This box must be secured to the ceiling firmly.

Canopy Installation

Canopy Hardware (not to scale)

Canopy Hatch

Canopy Screws and (4) Lock Washers	Phillips
	Screwdriver

Canopy

Step 3. Attach the canopy to the ceiling plate with three of the 8-32 x 21/2" long canopy screws and lock washers provided with your Casablanca fan. Tighten using the provided screwdriver until snug against the ceiling.

NOTE: On sloped ceilings, align the canopy opening with the top or peak of the room.

CANOPY

LOCK WASHERS

CANOPY SCREWS

8