DRIVING
3.Select the required cutting height
To obtain a uniform cutting height it is important that the tyre pressures are equal on both front wheels (60 kPa).
4.Push in the lock button on the lift lever and lower down the cutting unit.
IMPORTANT INFORMATION
The
Cutting tips
•Localise and mark stones and other fixed objects to avoid collision.
•Start with a high cutting height and reduce down until the required cutting result are obtained.
•The cutting results are best with a high engine speed (fast rotating blades) and low driving speed (slow moving machine). If the grass is not too high and thick the driving speed can be increased or the engine speed reduced without noticeably affecting the mowing results.
•The best lawns are achieved if the grass is cut often. Mowing becomes more uniform and the grass cuttings become more evenly distributed over the surface. The total time consumption is not greater since it is possible to select a higher driving speed without inferior mowing results.
•Avoid mowing a wet lawn. The mowing results are inferior since the wheels sink down into the soft lawn.
•Hose down the cutting unit with water underneath each time it is used. Put the cutting unit in the service position first.
•If you use the BioClip unit it is important to mow the grass regularly.
WARNING!
Clear the lawn from stones and other object which can be thrown out by the blades.
Mowing pattern
English – 17