DRIVING
WARNING!
Never drive the machine on ground with a slope of more than 15°. Mow slopes upwards and downwards, never across. Avoid sudden changes in direction.
Hill start, manual gearbox
1.Press down the parking brake.
2.Push the throttle control to 3/4 position to full throttle position.
3.Push down the clutch and engage first gear.
4.Carefully release the clutch.
5.When the engine starts to pull, release the parking brake.
Stopping the engine
Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard.
1.Lift up the cutting unit by pulling the lever back to the end position.
2.Rider 11 and Rider 11 Bio: Pull back the throttle control and put the gear lever into neutral “N” without pressing the reverse lock button. Turn the ignition key to the “STOP” position.
Rider 13 and Rider 13 Bio: Pull back the throttle lever and turn the ignition key to the “STOP” position.
3.When the rider mower is stationary, hold down the parking brake and push in the lock button.
Release lever Rider 13 and Rider 13 Bio
In order to move the machine when the engine is switched off the release lever must be pressed down and forwards.
MAX 15° |
STOP START |
18 – English