Husqvarna 39765, 13 Bio, 11 Bio manual Contents

Page 2

CONTENTS

Operator’s Manual for Rider 11 and Rider 13

Rider 11 Bio and Rider 13 Bio

Introduction	2
Driving and transport on public roads	2
Towing	2
Use	2
Serial number	3
Explanation of symbols	4
Safety instructions	5
General use	5
Driving on slopes	6
Children	7
Maintenance	7
Presentation	9
Location of the controls	9
Throttle/Choke lever	10
Drive disengagement lever	10
Parking brake	10
Throttle pedal	11
Cutting unit	12
Lift lever for cutting unit	12
Lever for adjustment of cutting height	13
Seat	13
Fuelling	13
Driving	14
Before starting	14
Starting the engine	14
Driving the machine	14
Cutting tips	17
Stopping the engine	18
Drive disengagement lever	18

Maintenance	19
Maintenance schedule	19
Dismantling of the machine hoods	20
Checking and adjusting the steering wires ....	22
Checking and adjusting the brakes	23
Checking and adjustment of throttle wire	24
Replacement of fuel filter	24
Replacement of air filter	25
Checking the fuel pump’s air filter	26
Checking the battery acid level	26
Checking the safety system	27
Checking the tyre pressure	28
Checking the engine’s cooling air intake	28
Checking and adjusting the cutting unit
ground pressure	29
Checking the parallelism of the cutting unit ...	29
Adjusting the parallelism of the cutting unit ....	30
Service position for BioClip 90	31
Checking the blades	34
Replacing the break-pin	34
Changing the oil	35
Lubrication	35
Checking the engine’s oil level	35
Checking the transmission’s oil level	36
Lubricating the belt adjuster	36
General lubrication	36
Lubrication of front wheel bearings	37
Trouble shooting schedule	38
Storage	39
Winter storage	39
Service	39
Technical data	40

IMPORTANT INFORMATION

Read through these instructions carefully so that you know how to use and maintain the machine before using it.

For servicing other than described in this manual contact an authorised dealer for parts and service.

English – 1

Image 2

Contents Rider 11/13 Rider 11 Bio/13 Bio 101 91Contents Travel and transport on public roads InstructionDear customer TowingSerial number Safety InstructionsGood service Engine TransmissionExplanation of Symbols These instructions are for your safety. Read them carefully General useDriving on slopes Do as followsMaintenance ChildrenBattery can explode and cause severe injuries Location of the controls PresentationPresentation Clutch pedal Presentation Rider 11 / 11 BIOThrottle and Choke lever Brake pedal / Parking brakeParking brake Presentation Rider 13/13 BIOSpeed limiter Rider 11 Bio and Rider 13 Bio have a twin-blade Cutting unitLift lever for cutting unit Fuelling Lever for adjustment of cutting heightSeat Starting the engine DrivingBefore starting Cold engine Warm engineFor Rider 11 and Rider 11 Bio Driving the machineFor Rider 13 and Rider 13 Bio Cutting tips Release lever Rider 13 and Rider 13 Bio Hill start, manual gearboxStopping the engine Daily Maintenance interval Hours Nance 100 MaintenanceMaintenance schedule Front hood Rider 11 and Rider Dismantling of the machine hoodsEngine hood Front hood Rider 11 Bio and Rider 13 BioRight-hand fender Left-hand fenderChecking and adjustment of the steering wires Poorly adjusted brakes can result in reduced braking power Adjusting the brake Rider 11 and Rider 11 BioCheck and adjust the brakes on Rider 13 and Rider 13 Bio Checking the brake Rider 11 and Rider 11 BioChecking and adjustment of the throttle wire Replacement of the fuel filterDo not use compressed air to clean the paper filter Replacing the air filterChecking of the fuel pump’s air filter Check the level of the battery acidProcedures on contact with acid Inspecting the safety system Checking the tyre pressure Check the engine’s cooling air intakeChecking the cutting unit’s parallelism Maintenance Placing in service position Maintenance Rider 11 BIO/13 BIOService position for BioClip Maintenance Rider 11 BIO/13 BIO Restoring from service position Checking the blades Replacing the break-pin BioClipChanging the oil LubricationCheck the engine’s oil level Lubrication of belt tensioner General lubricationLubrication Rider 11 and Rider 11 Bio Lubrication of front wheel bearingsTrouble Shooting Schedule Problem ProcedureWinter storage ServiceStorage Engine Technical DataDimensions Rider Electrical systemDimensions Rider 11 Bio Rider 13 Bio EU declaration of conformity Only applies to Europe Work done Date, mileage, stamp, sign Servicejournal Rider 11/13Pre-delivery service Servicejournal Page 2000W50