5-12 CHAPTER 5: INSTALLING NETWORK DRIVERS
Disabling RPL
To disable RPL:
1Boot your PC under DOS.
2Make sure that the backup copy of the TokenDisk diskette
is in a floppy drive on your PC.
3At the diskette prompt, type:
3TOKDIAG [Enter]
4From the Install pull-down menu, select Configure Adapter.
5Using the arrow keys, move to Boot PROM.
6Press [Enter] and select Disable.
7Press [Enter].
8Select OK and press [Enter] to save the setting.
9Remove the diskette from the drive and reboot the PC.
This completes the description of how to use RPL with the
3C619C adapter.