7-4 CHAPTER 7: TROUBLESHOOTING
Diagnostic Test TypesThe tests performed by the TokenDisk diskette Configuration
and Diagnostic Program are divided into Group 1 and
Group 2 tests.
A lobe cable must be connected from the selected adapter to
a retiming concentrator or MAU for all tests.
Group 1 Diagnostics
Group 1 diagnostics test physical components, connectors,
and circuitry of the adapter. They include the following tests:
■MMIO Register Write/Read Test
■Boot PROM Test (if the Boot PROM is enabled)
■AIP Checksum Test
■Shared RAM Boundary/Domain Test
■Shared RAM Write/Read Test
■Timer Test
■Open Adapter for Ring Operation Test
■Ring Operations Test
■Close Adapter Test
Each of these tests is explained in more detail below.
MMIO Register Write/Read Test
This test verifies that the PC can access the adapter’s memory
mapped I/O registers correctly.
Boot PROM Test
This test verifies that the PC can access the Boot PROM
correctly and verifies the integrity of the Boot PROM.