Manuals / IBM / Computer Equipment / Network Card

IBM 09-0572-000 manual Updating the Current NDIS Driver, Using IBM Drivers

Models: 09-0572-000

1 101

Download 101 pages 45.17 Kb

Page 49

Updating the Current NDIS Driver

Updating the Current NDIS Driver

5-9

Updating the Current NDIS Driver

If you are updating an existing NDIS driver (rather than installing one for the ﬁrst time), follow these steps:

1From the main menu, select Network Drivers and press [Enter].

2Select NDIS Driver Installation and Information.

3Select Update NDIS Driver and press [Enter].

This option will update your current driver to the latest version. The NDIS 2.01 drivers are TLNK3.DOS and TLNK3.OS2.

4Exit the program and remove the TokenDisk diskette.

5Reboot your PC.

This completes the procedure for updating the NDIS 2.01 drivers.

Using IBM Drivers

The 3C619C adapter is fully IBM-compatible. Because of this, the 3C619C adapter can use the same drivers as IBM 16/4 Token Ring Adapters.

Obtaining IBM Network Drivers

Obtain IBM token ring drivers for the 3C619C adapter in one of the following ways:

■Copy IBM 16/4 Token Ring Adapter drivers supplied with your network operating system.

■Use the Remote Program Load (RPL) program to download IBM drivers from the network. Follow the procedures described in the next section, “Using Remote Program Load (RPL).”

■Use the IBM 16/4 Token Ring Adapter drivers that accompany the latest version of IBM’s LAN Support Program.

With IBM drivers, use only IBM mode settings.

Image 49

IBM 09-0572-000 manual Updating the Current NDIS Driver, Using IBM Drivers, Obtaining IBM Network Drivers

Contents

TOKENLINK III 16/4 ISA ADAPTER USER GUIDELIFETIME WARRANTY 3Com Australia, Marketing Department Italy, Greece, Spain, Portugal, Malta3Com Japan, Marketing Department Shinjuku Sumitomo Building 23F3Com Corporation 5400 Bayfront Plaza Santa Clara, California Installing the Adapter CONTENTS4 STANDARD INSTALLATION AND CONFIGURATION Conﬁguration Requirements Adapter LEDs Diagnostic Test TypesUsing the Keyboard CE NOTICE GLOSSARY INDEX LIMITED WARRANTY FCC CLASS A VERIFICATION STATEMENTFIGURES Initial 3Com and IBM Mode Option Settings TABLESCommand Line Keywords ABOUT THIS GUIDE How to Use This GuideIntroduction commands ConventionsA Install This1 INTRODUCTION TokenLink III 16/4 ISA Token Ring Adapter FeaturesAutoLink Installation Installation and Conﬁguration OptionsInstallation and Configuration Options Figure 1-1 Adapter Installation and ConﬁgurationStandard Installation and Conﬁguration TroubleshootingWindows Installation and Conﬁguration Transcend PC Link SmartAgent Software100% Compatibility Money-Back GuaranteeADAPTER INSTALLING THE 3C619CPC Requirements Taking Safety Precautions Inspecting the Adapter Installing the Adapter Connecting to the NetworkInstall single No adapter as a NetWare DOS ODI client ? Yes Inspect adapter Install adapter Connect cable to installed adapter2-2 CHAPTER 2 INSTALLING THE 3C619C ADAPTER Network UTP cabling type ?PC Requirements Inspecting the Adapter Taking Safety PrecautionsTokenLink III 16/4 ISA Adapter User Guide Install the 3C619C adapter as follows Installing the AdapterInstalling the Adapter 4 Check the adapter for any visible signs of damage4 Replace the PC’s cover Figure 2-5 and Figure 2-6 show the adapter connectors Connecting to the NetworkType Shielded twisted-pair STP cableConnecting to Shielded Twisted-pair STP Cable Do not daisy-chain token ring adapters or connect them back to back Connecting to Unshielded Twisted-pair UTP CableFEATURE FOR NET WARE USING THE AUTO LINKAutoLink Options AutoLink RequirementsVerify that you meet the following requirements NetWare on the server must be version 2.2 or later1 Make a backup copy of the CONFIG.SYS ﬁle. Type Avoiding Memory Manager Conﬂicts3 Save the CONFIG.SYS ﬁle and exit the text editor 4 Reboot the PC copy CONFIG.SYS CONFIG.OLDTo view the full text of the license agreement, press F1 Using the AutoLink FeatureAND CONFIGURATION STANDARD INSTALLATIONFigure 4-1 Standard Installation and Conﬁguration Auto Conﬁguring the 3C619C Adapter in an ISA PC Conﬁguration RequirementsDEVICE=C\EMM386.EXE NOEMS X=D800-DBFF To view the full text of the license agreement, press F1 4 Type at the promptIBM mode, 4 Mbps 3Com mode, 16 Mbps 3Com mode, 4 Mbps IBM mode, 16 MbpsBIOS/MMIO Base Address Changing Software Option Settings4-6 CHAPTER 4 STANDARD INSTALLATION AND CONFIGURATION 8 Highlight Install and press Enter Video Conﬂicts with BIOS/MMIO and Shared RAM Addresses Changing Settings for Multiple Adapters3CTOK.SET Changing Software Option Settings DRIVERS INSTALLING NETWORKFigure 5-1 Network Drivers Installation Process Installing the Novell NetWare Driver F1=Help ESC=Cancel Installing the Novell NetWare DriverF1=Help ESC=Cancel M A I NUpdating the PC Startup Files Installing the Server Driver for NetWare Installing the OS/2 Network Driver for NetWareNetWare Systems with Multiple Adapters LINK DRIVER 3CTOKEN PORT LINK DRIVER 3CTOKEN PORT5-6 CHAPTER 5 INSTALLING NETWORK DRIVERS Installing the NDIS 2.01 Driver2 Build a PROTOCOL.INI ﬁle in the LANMAN subdirectory Updating the PC Startup FilesOptional for ﬁrst adapter installed in NDIS Systems with Multiple AdaptersWith IBM drivers, use only IBM mode settings Using IBM DriversUpdating the Current NDIS Driver Obtaining IBM Network DriversUsing Remote Program Load RPL Enabling RPL 5-12 CHAPTER 5 INSTALLING NETWORK DRIVERS Installing the Network Driver for Windows NT INSTALLING THE NETWORKDRIVER FOR WINDOWS Installing the Network Driver for Windows 6 From the Select Network Adapters dialog box, click Have Disk Adapter LEDs 7 TROUBLESHOOTINGUsing the TokenDisk Diskette Diagnostic Program Type 3TOKDIAG Figure 7-2 Diagnostic FlowchartGroup 1 Diagnostics Diagnostic Test TypesDiagnostic Test Types Running the Diagnostic Tests Group 2 Diagnostic1 To start the diagnostic program, type 2 From the Test pull-down menu shown in Figure 7-3, select Run TestsDiagnostic and Manual Configuration Program Diagnostic Test TypesTokenLink III 16-bit ISA Adapter ENTER=Run the Diagnostic Tests F1=Help F3=Exit F4=Configure Adapter F6=Test SetupChanging the Test Setup Adapter Statistics and Information When Tests FailAdapter Statistics Adapter Information When Tests FailMMIO Register Write/Read Test Failure Boot PROM Test FailureAIP Checksum Test Failure Shared RAM Boundary/Domain Test FailureShared RAM Write/Read Test Failure Timer Test FailureOpen Adapter for Ring Operation Test Failure Ring Operations Test FailureClose Adapter Test Failure Troubleshooting TipsAdapter Wrap Test Failure Group Refer to Appendix B, “Speciﬁcations.” Additional Information Error MessagesOn-line Information Technical SupportFigure A-1 Menu Hierarchy USING THE A CONFIGURATION AND DIAGNOSTIC PROGRAMSpeed Keys Using the KeyboardChoosing a Menu Item Using the MouseUsing the Mouse Help Using the File OptionsExiting the Program Using the Command LineCabling B SPECIFICATIONSPin Assignments Figure B-2 RJ-45 Connector Pin Assignments Figure B-1 DB-9 Connector Pin AssignmentsB-2 APPENDIX B SPECIFICATIONS RX RX TX TXConﬁguration Options Conﬁguration ModeI/O Base Address Ring SpeedShared RAM Page Size and Address Range BIOS/MMIO Address LocationC0000-C1FFF C2000-C3FFFInterrupt Request Level Other Conﬁguration Options 3Com recommends that you not change the setting of these optionsConfiguration Options Messages C ERROR MESSAGESC-2 APPENDIX C ERROR MESSAGES Messages C-3 C-4 APPENDIX C ERROR MESSAGES Messages C-5 3Com Bulletin Board Service On-line Technical ServicesD TECHNICAL SUPPORT World Wide Web Site 3ComFacts Automated Fax ServiceAsk3Com on CompuServe Support from Your Network Supplier To obtain an RMA number, call or fax Returning Products for RepairGLOSSARY IEEE NET.CFG 4 GLOSSARY Numerics INDEXPage Page Page not registered 3Com Corporation 5400 Bayfront Plaza