IBM 09-0572-000 manual When Tests Fail, Adapter Information

7-10 CHAPTER 7: TROUBLESHOOTING

Adapter Information

Use the View pull-down menu and select Adapter Information, or press [F8] from the main screen. An example of the Adapter Information screen is shown in Figure 7-7.

Diagnostic and Manual Configuration Program

Quit Install Test View Select

3Com 3C619C: Token Ring Address = 00608C112233

Adapter Information

F1=Help

Token Ring address:	00600C112233	−
Date of Manufacture:	11/1/95
Division Code:	6
Product Code:	BE
Configuration Mode:	3Com
I/O base address:	A20H
Interrupt request level:	3
Ring speed:	16 Mbps
BIOS/MMIO base address:	CC000H
Boot PROM:	Not Present
Shared RAM base address:	D0000H
Shared RAM size:	64 kB	↓

Cancel

[ENTER]=<Cancel> [−↓]=Scroll

[Alt]+<Highlighted Key>=Execute Function [PgDn]=Page Down [PgUp]=Page Up

Figure 7-7 Adapter Information

Use the scroll bar to display the full list of parameters on this screen.

When Tests Fail

If the diagnostic tests fail, the adapter may not be defective. The problem may be incorrect configuration settings, configuration settings that conflict with the settings of other boards, or improper installation.

If any test fails, you can get additional information by highlighting the test that failed in the Run Tests dialog box shown in Figure 7-4, and pressing [Enter]. You can also highlight the <Zoom> command button and press [Enter]. The program notifies you of the error and suggests actions you can take to solve the problem.