IBM 09-0572-000 manual Connecting to Shielded Twisted-pair STP Cable

2-8 CHAPTER 2: INSTALLING THE 3C619C ADAPTER

Connecting to Shielded Twisted-pair (STP) Cable

1Locate the adapter’s DB-9 connector on the backplate, as shown in Figure 2-5.

DB-9 port

DB-9 connector

Figure 2-5 Attaching the STP Cable with the DB-9 Connector

2Locate the DB-9 connector on the shielded twisted-pair cable.

3Connect the cable’s DB-9 connector to the adapter’s DB-9 port, and secure it by tightening the two screws.

4Connect the other end of the cable to a network dual access unit (DAU), a multistation access unit (MAU), or a controlled access unit (CAU).

If you have a NetWare server, proceed to Chapter 3. If you have any other type of network operating system, proceed to Chapter 4.