IBM 09-0572-000 manual 2 Diagnostic Flowchart, Type 3TOKDIAG

Using the TokenDisk Diskette Diagnostic Program 7-3

If you have already installed the network driver, you need to reboot and press [F5] or use a DOS diskette to bypass the drivers before you run the diagnostic program. Use a DOS diskette if you are running DOS 5.0 or earlier. If you are running Windows NT, boot the DOS partition or boot from a DOS diskette to run the diagnostic program. If you are running Windows 95, exit Windows 95 and restart the PC in MS-DOS mode.

Figure 7-2 depicts how to use the TokenDisk diskette diagnostic program.

Insert TokenDisk diskette

Make diskette drive active

Type: 3TOKDIAG

No (Custom)

Standard test ?

Select Test Setup

Yes

Select test

Select Run Tests

Figure 7-2 Diagnostic Flowchart