IBM 09-0572-000 MMIO Register Write/Read Test Failure, Boot PROM Test Failure, When Tests Fail

When Tests Fail 7-11

The following information is displayed on the screen, indicating what to do when the specific test fails.

MMIO Register Write/Read Test Failure

■Check the ROM base address setting on the adapter and make sure that it is not being used by another device.

■Run the test three times with a delay of at least 30 seconds between each test. If the error persists, power down the PC and try once more.

Boot PROM Test Failure

■Check the ROM base address setting on the adapter and make sure that it is not being used by another device.

■Refer to the “Configuration Options” section in Appendix B for more information.

AIP Checksum Test Failure

■Check the ROM base address setting on the adapter and make sure that it is not being used by another device.

■Run the test three times with a delay of at least 30 seconds between each test. If the error persists, power down the PC and try once more.

Shared RAM Boundary/Domain Test Failure

■Make sure the RAM base address is aligned according to the selected shared RAM size.

■Make sure the shared RAM address does not conflict with the adapter ROM or another device.