IBM 09-0572-000 manual Using The Auto Link, Feature For Net Ware

3	USING THE AUTOLINK
	FEATURE FOR NETWARE

The AutoLink auto installation feature for NetWare configures the adapter as a NetWare DOS ODI client. The AutoLink installation steps are depicted in Figure 3-1.

If memory manager is installed,

exclude memory range

D8000 – DBFFF

Insert TokenDisk diskette.

Make diskette drive active.

Type: AUTOLINK

Select ring speed and configuration mode

Remove diskette

and reboot computer

Figure 3-1 AutoLink Installation Process

This chapter describes the AutoLink program requirements, ways to avoid memory conflicts, and installation steps. See Chapter 5 for other NetWare and NDIS operating system information and see Chapter 6 for information about installing the network driver for Windows NT and Windows 95.

The AutoLink program performs the following functions:

■Configures the 3C619C adapter.

■Tests the adapter.

■Installs the DOS ODI client driver.