IBM 09-0572-000 manual Highlight Install and press Enter

Changing Software Option Settings 4-7

7When the next screen appears, select Configuration and Diagnostic Program.

8Highlight Install and press [Enter].

9Press [Enter] to select Configure Adapter.

A screen similar to the one shown in Figure 4-3 appears.

Diagnostic and Manual Configuration Program

Quit Install Test View Select

Adapter Configuration

F1=Help

TokenLink III Adapter Configuration

Configuration Mode			3Com
l/O Base Address			A20h
Interrupt Request Level			3
Ring Speed			16	Mbps
BIOS/MMIO Base Address			CC000h
Shared RAM Address Range			D8000h - DBFFFh
Memory Mode			16	bit
I/O Mode			16	bit
IRQ Driver Type			Edge Triggered
Auto Switch			Enabled
Boot PROM			Enabled
Modify	File Options		OK	Cancel

[ENTER]=Change the Setting [−↓]=Scroll

[Alt]+<Highlighted Key>=Execute Function

Figure 4-3 Adapter Configuration Screen

10Use the arrow keys to highlight a desired parameter option and press [Enter].

A second dialog box appears.

11Use the arrow keys to scroll through the list of settings for that option. Select a setting and press [Enter].

12Continue this procedure with any of the other options.

13Press [Tab] three times to highlight <OK>. Press [Enter].

You must highlight <OK> and press [Enter] to save the new settings to the adapter.