Interface Connections and First Time
2.Attach the male end of the power cable into an AC power source. The system is powered up when power is applied to the power supplies.
NOTE: If the system is powered up with one power supply or if one of the power supplies experiences a loss of power, an audible alarm sounds. To silence this sound, press the red button located on the left side of the primary power supply.
|
|
|
| |
Startup and | During power up and normal operation, you can observe | |||
Normal | by checking LED activity on the system front panel. | |||
|
|
| ||
Operation | Table | |||
LED Displays |
| Table | ||
|
| |||
|
|
|
| |
LED | Color/Label | State | Description | |
|
|
|
| |
10/100 Fast Ethernet | Green | On | Ethernet connectivity present. | |
|
|
|
| |
| Yellow | Flashing | Traffic is present. | |
|
|
|
| |
10/100/100 Fast | Fiber/Green | On | Fiber connectivity present. | |
Ethernet/Gigabit |
|
|
| |
Activity/Green | Flashing | Traffic is present. | ||
Ethernet | ||||
|
|
| ||
Link/Green | On | Ethernet connectivity present. | ||
| ||||
|
|
|
| |
Power/Sleep(PWR) | Green | On | Power on. | |
|
|
|
| |
|
| Flashing 1 | In sleep state. | |
| Off | Off | Power is off. | |
|
|
|
| |
MGMT1/MGMT2 | Green | Random Flash | NIC activity present. | |
|
|
|
| |
System Status (SYS) | Green | On | Running with normal operation. | |
|
|
|
| |
|
| Flashing 2 | Degraded. | |
| Amber | On | Critical or | |
|
|
|
| |
|
| Flashing 2 | ||
| Off | Off | Post/system stop. | |
|
|
|
| |
Disk Activity (HDD) | Green | Random Flash | Disk activity present. | |
|
|
|
| |
| Off | Off 3 | No hard disk activity detected. | |
1.The PWR LED sleep indication is maintained on standby by the system. If the system is powered down without going through BIOS, the LED state in effect at the time of power off, is restored when the system is powered on until cleared by the BIOS. If the system is not powered down normally, the PWR LED may blink even though the SYS LED may be off due to a failure or configuration change that prevents the BIOS from running.
2.The Amber status takes precedence over the Green status. When the Amber LED is on or flashing, the Green LED is off.
3.This LED is also off when the system is powered off or in a sleep state.
3COM Security Switch 6200 Hardware and Software Users Guide |
