3Com manual 3COM Security Switch 6200 Hardware and Software Users Guide

Configuring the Security Switch 6200 System

etc/snmp/snmp.local.conf)]: srhen@crossbeamsys.com Enter SNMP Location [Unknown (edit /etc/snmp/ snmpd.conf)]: Lab

SNMP configuration

==================

1)SNMP Server

2)Communities

3)Trap Destinations X) Exit

Enter choice <1 - 3, X>[X]: 1

SNMP Server

===========

Enabled enabled

Contact lab@3com.com Location The Lab

Would You Like to Modify the SNMP Configuration <y or n>[n]:

3.Enter y to modify the SNMP configuration or n to return to the SNMP Configuration menu.

SNMP configuration

==================

1)SNMP Server

2)Communities

3)Trap Destinations

X) Exit

4.Configure SNMP Communities. For example:

Enter choice <1 - 3, X>[X]: 2

SNMP Communities

================

Community Address Netmask Access

Change the SNMP Communities <Add, Delete or eXit>[eXit]: a

Enter Community Name []: foobar

Enter IP Source Addresses [0.0.0.0/32]: 10.2.1.48/32 Enter Access Mode <read-only, read-write>[read-only]: read-write

4-8 3COM Security Switch 6200 Hardware and Software Users Guide