4.Select a region.

Interface Connections and First Time Start-Up

4.Select a region.

1)Eastern Time

2)Eastern Time - Michigan - most locations

3)Eastern Time - Kentucky - Louisville area

4)Eastern Time - Kentucky - Wayne County

5)Eastern Standard Time - Indiana - most locations

6)Eastern Standard Time - Indiana - Crawford County

7)Eastern Standard Time - Indiana - Starke County

8)Eastern Standard Time - Indiana - Switzerland County

9)Central Time

10)Central Time - Michigan - Wisconsin border

11)Central Time - North Dakota - Oliver County

12)Mountain Time

13)Mountain Time - south Idaho & east Oregon

14)Mountain Time - Navajo

15)Mountain Standard Time - Arizona

16)Pacific Time

17)Alaska Time

18)Alaska Time - Alaska panhandle

19)Alaska Time - Alaska panhandle neck

20)Alaska Time - west Alaska

21)Aleutian Islands

Enter choice <1 - 21>:

5.Define the Management Services.

Management Services

===================

Several methods are available for managing your system through the 10/100 Ethernet interface on the host. Select the desired management services.

Enable Telnet Server <disabled, enabled>[enabled]: Enable FTP Server <disabled, enabled>[enabled]:

Add DNS Lookups <Y or N>[N]: DNS Server IP Address [0.0.0.0]:

6.Configure the SNMP parameters.

Configure SNMP Network Management <Y or N>[N]: Enabling SNMP ...

Enable SNMP Network Management <disabled, enabled> [disabled]:

Enter SNMP Contact []: Enter SNMP Location []:

The SNMP community string is the access string to permit access to the SNMP protocol. A read-only "ro" or read-write "rw" access may be specified. By default, SNMP community string permits read-only access.

3-10

3COM Security Switch 6200 Hardware and Software Users Guide

Page 28
Image 28
3Com 3-10, 3COM Security Switch 6200 Hardware and Software Users Guide, Select a region, Define the Management Services