Configuring the Security Switch 6200 System
Configuring
Network
Interfaces
A network interface associates an IP address with a physical connection and optionally a VLAN id. To configure network interfaces:
1.Select Option 8 from the main menu.
IP Interfaces
=============
Enabled | Address | Netmask | Broadcast | MTU |
management 1 192.168.10.6 255.255.255.0 192.168.10.255 1500 enabled
2.To add a network interface, select add from the main menu. For example:
Modify the IP Interfaces <Add, Delete, Modify or eXit>[eXit]: a
Physical Interface [fastethernet 1]: VLAN Interface <Y or N>[N]:
Interface State <disabled, enabled>[enabled]: Enter the IP Address [0.0.0.0/0]: 128.205.1.23/24 Broadcast Address [128.205.1.255]:
MTU [1500]:
IP Interfaces
=============
Enabled | Address | Netmask | Broadcast | MTU |
management 1 | 192.168.10.6 | 255.255.255.0 192.168.10.25 | 1500 | |
enabled |
|
| 5 |
|
fastethernet 1 128.205.1.23 | 255.255.255.0 128.205.1.255 | 1500 | ||
enabled |
|
|
|
|
3.Enter the desired option to add, delete, or modify additional network interfaces or enter x to return to the main menu. For example:
Modify the IP Interfaces <Add, Delete, Modify or eXit>[eXit]: a
Physical Interface [fastethernet 1]:
VLAN Interface <Y or N>[N]: y Enter VLAN ID <1 - 4095>: 100
Interface State <disabled, enabled>[enabled]: Enter the IP Address [0.0.0.0/0]: 128.205.2.23/24 Broadcast Address [128.205.2.255]:
MTU [1500]:
3COM Security Switch 6200 Hardware and Software Users Guide |
|
