Interface Connections and First Time
SNMP Communities
================
Community | Address | Netmask | Access |
middle | 10.1.1.22 | 255.255.255.255 |
Add the SNMP Communities <Y or N>[N]:
7.Configure the individual user accounts.
Accounts Configuration
=======================
This section allows you to change your “root” password. Additionally, you can set up accounts for users to log into once the Interview is complete.
Set 'root' Password <Y or N>[Y]:
Additional user accounts can be defined, each with its own username and password.
Add or Modify User Accounts <Y or N>[Y]: Enter User Name []:
Enter password: Verify password:
Enable Login Access <disabled, enabled>[disabled]: Enter Access Level <Guest, Network Operator, Service Operator, Administrator>[Guest]:
The following is an example display showing configured users.
User Accounts
=============
User Name | Login Access | Access Level |
admin | enabled | Administrator |
foobar | enabled | Guest |
Add or Modify User Accounts <Y or N>[Y]: n
8.Configure the host interfaces.
Host Interfaces
===============
This section will help you configure interfaces on the Host. The system has two management ports, two GigaBit Ethernet ports, and 16 10/100 ports.
NOTE: At least one management port must be configured on the system.
3COM Security Switch 6200 Hardware and Software Users Guide |
|
