3Com PC Card manual FCC Declaration

FCC CLASS B CERTIFICATION STATEMENT

3Com Corporation

Model No: 3CCFEM656

Made in U.S.A.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1This device may not cause harmful interference, and

2This device must accept any interference received, including interference that may cause undesired operation.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, and the Canadian Department of Communications Equipment Standards entitled, “Digital Apparatus,” ICES-003.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from the one which the receiver is connected to.

■Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet prepared by the Federal Communications Commission helpful:

The Interference Handbook

This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No. 004-000-00345-4.

NOTE: In order to maintain compliance with the limits of a Class B digital device, 3Com requires that you use quality interface cables when connecting to this device. Changes or modifications not expressly approved by 3Com could void the user’s authority to operate this equipment. Refer to the manual for specifications on cabling types.

FCC DECLARATION OF	We declare under our sole responsibility that the
CONFORMITY	Model:	Description:
	3CCFEM656	10/100 LAN + 56K Modem CardBus PC Card

to which this declaration relates, is in conformity with the following standards or other normative documents:

■ANSI C63.4-1992 Methods of Measurement

■Federal Communications Commission 47 CFR Part 15, subpart B

15.107 (e) Class B Conducted Limits

15.109 (g) Class B Radiated Emissions Limits

FCC PART 68 STATEMENT	3Com Corporation
	Model No: 3CCFEM656
	Made in U.S.A.
	This equipment complies with Part 68 of the Federal Communications Commission (FCC) rules.
	On the product is a label that contains the FCC registration number and Ringer Equivalence Number (REN) for this device. If
	requested, this information must be provided to the telephone company.
	An FCC compliant telephone cord with a modular plug is provided with this equipment. This equipment is designed to be
	connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See
	installation instructions for details.
	The Ringer Equivalence Number (REN) is used to determine the quantity of devices which may be connected to the telephone
	line. Excessive REN’s on a telephone line may result in the devices not ringing in response to an incoming call. In most areas, the
	sum of REN’s should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as
	determined by the total REN’s, contact the local telephone company.
	If this device causes harm to the telephone network, the telephone company will notify you in advance that temporary
	discontinuance of service may be required. The telephone company may request that you disconnect the equipment until the
	problem is resolved.
	The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation
	of this equipment. If this happens the telephone company will provide advance notice in order for you to make necessary
	modifications to maintain uninterrupted service.
	This equipment cannot be used on telephone company provided coin service. Connection to party line service is subject to state
	tariffs. Contact the state public utility commission or public service commission for information.
	When programming and/or making test calls to emergency numbers:
	-- Remain on the line and briefly explain to the dispatcher the reason for the call.
	-- Perform such activities in the off-peak hours such as early morning or late evenings.
	Note: The United States Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or
	other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at
	the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an
	identification of the business or other entity, or other individual sending the message and the telephone number of the sending
	machine or such business, other entity, or individual. Refer to your fax communication software documentation for details on
	how to comply with the fax-branding requirement.
	If trouble is experienced with this equipment or for repair or warranty information in the U.S. and Canada, please contact Dell