3Com VFD-D D manual Door Close Error Deceleration Time, Door Re-open Detection Time

Chapter 4 Parameter SettingsDD Series

Larger current is required at the beginning of door open and door close, so it needs to have larger re-open current level in the acceleration area. Please refer to the following figure for setting reopen current and acceleration area:

Open Door ( REV)

04.03 Door Open H igh Speed 1

Door Open						04.07
by Ini tial					04.05
	04.08					Door Open
Speed				04.09	Door Open
04.00	Door Open			Door Open	Final Speed	Holding Speed
	Accel eration			Deceleration
	Time 1			Time 1		04.06
04.01					04.04	Door Open
Door Open D istance by					Door Open	by Holding Speed
Ini tial Speed					by Final Speed	Begi ns
					Begi ns
	05.05		05.09		05.08	05.00
05.07					D oor Clos e	Door Close
Door Close	Door Close		Door Close	Accelerati on Time 1		Ini tial Speed
			Final Speed
Holding Speed	Final Speed
				05.03		05.01
		05.04
05.06				Door Close		Door Close
		Door Close		High Speed 1		Distance by
Door Close
		by Final Speed
by Holding						Ini tial Speed
		Begi ns
Speed	Begins
			Clos e Door (FWD)
05.31						05.32
Door Re-open						Door Re-open
Low Speed Boundary			Re-open Detected Area			Accel eration
						Boundary

05.25 * 04.11/100

Door Re-open Current Level for Acceleration Area

05.25

Door reopen current level 1

Door Close Limit	Door Open Li mit
0.0%	100.0%

Door Close Error Deceleration Time

Control mode VF VFPG SVC FOCPG FOCPM		Factory setting: 0.4
	Settings 0.1~3600sec

Door Re-open Detection Time

Control mode VF VFPG SVC FOCPG FOCPM		Factory setting: 0.2
	Settings 0~10.0sec

4-55