3Com VFD-D D manual Motor Parameters

Chapter 4 Parameter SettingsDD Series
01 Motor Parameters		: This parameter can be set during operation.
Parameter	Explanation	Settings	Factory	VF	VFP	SVC	FOC	FOC
			Setting
01.00	Motor Auto Tuning (PM)	0: No function	0					○
		1: Auto-tuning for PM motor parameters
		(brake locked)
		2: Auto-tuning for PG offset angle without
		load (Pr.01.09)
		3: Auto-tuning for PG offset angle with
		load (Pr.01.09)
01.01	Full-load Current of motor	(20~120%)*00.01 Amps	1.00					○
	(PM)
01.02	Rated power of Motor (PM)	0.00~655.35kW	0.06					○
01.03	Rated speed of Motor (rpm)	0~65535	250					○
	(PM)
01.04	Number of Motor Poles	2~96	16					○
	(PM)
01.05	Rs of Motor parameter	0.0~655.35Ω	13.900					○
	(PM)
01.06	Ld of Motor Parameter	0.0~6553.5mH	169.4					○
	(PM)
01.07	Lq of Motor Parameter	0.0~6553.5mH	169.4					○
	(PM)
01.08	Back Electromotive Force	0.0~6553.5Vrms	0.0					○
	(PM)
01.09	Angle between Magnetic	0.0~360.0°	360.0					○
	Pole and PG Origin (PM)
01.10	Magnetic Pole	0:No function	0					○
	Re-orientation (PM)	1:Reset magnetic pole position
01.11	Motor Auto Tuning (IM)	0: No function	0			○	○
		1: Rolling test
		2: Static test
		3: Reserved
01.12	Full-load Current of Motor	(20~120%)*00.01 Amps	1.00	○	○	○	○
	(IM)
01.13	Rated power of Motor (IM)	0.00~655.35kW	0.06			○	○
01.14	Rated speed of Motor (rpm)	0~65535	250		○	○	○
	(IM)
01.15	Number of Motor Poles (IM)	2~48	16	○	○	○	○
01.16	No-load Current of Motor	00~ Pr.01.12 factory setting	#.##		○	○	○
	(IM)
01.17	Rs of Motor (IM)	0.000~65.535Ω	0.000			○	○
01.18	Rr of Motor (IM)	0.000~65.535Ω	0.000			○	○
01.19	Lm of Motor (IM)	0.0~6553.5mH	0.0			○	○
01.20	Lx of Motor (IM)	0.0~6553.5mH	0.0			○	○
01.21	Torque Compensation Time	0.001~10.000sec	0.020			○
	Constant
		4-4