ADMINISTRATOR SECTION CHAPTER 2: CONFIGURING THE ER SERVER

Restart the Web Client Server

In the Restart Web Client Server frame, click Restart to restart the Web Client server. As a result of this action, a screen displays with the following message: “The Web Client Server will restart in a few minutes.” Click OK to return to the Web Client Server Management screen.

Enable/Disable Web Client Server Access

1.In the Enable/Disable HTTP/HTTPS access to Web Client Server frame, click the checkbox(es) corre- sponding to the option(s) for logging into the Web Client:

“HTTP” - Choose this option to let users log into the Web Client using an HTTP IP address

“HTTPS” - Choose this option to let users log into the Web Client using an HTTPS IP address

NOTE: Remove the check mark to disable a selection.

2. Click Apply.

Enable/Disable the Web Client Scheduler

1.In the Enable/Disable Web Client Schedule frame, click the appropriate radio button to specify whether or not to automatically run scheduled Web Client reports:

“ON” - Choose this option to let the Web Client auto- matically run scheduled reports.

WARNING: Do not select this option if using the Access Client to run scheduled reports; duplicate reports will be generated.

“OFF” - Choose this option to use the Access Client for running scheduled reports, or if you do not want the Web Client to run scheduled reports.

2.Click Apply.

3.Click Restart to restart the Web Client Server.

68

8E6 TECHNOLOGIES, ENTERPRISE REPORTER ADMINISTRATOR USER GUIDE

Page 78
Image 78
8e6 Technologies ER manual Restart the Web Client Server, Enable/Disable Web Client Server Access