P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 Conî‚¿dential 2-1

Chapter 2

Disassembly& Assembly Process

2-1 Equipment Needed & Product Overview

1. Screw Bit (+) :107
2. Hex Sleeves 5mm
3. Long Nose Nipper
4. Screw Bit (+) :102
5. Hex Sleeves 7mm
6. Tweezers
7. P3150/P3250/P3150 refresh/P3250 refresh/P3251 unit
* Before you start: This process is protective level II. Operators should wear electrostatic chains.
* Note: 1. If you need to replace the main board, you have to get into service mode and record the
lamp usage hour. please refer to section 2-21.
2.The disassembly and assembly process for P3150/P3250/P3150 refresh/P3250 refresh/
P3251 is the same. Here, we take P3250 as an example.