The command line at the bottom of the menu tells you how to move within a screen and from one screen to another.
!To select an option, move the highlight bar by pressing 
or 
then press 
.
!Press 
to move to the next page or 
to return to the previous page.
!To change a parameter setting, press 
or 
until the desired setting is found.
!Press 
to return to the main menu. If you are already in the main menu, press 
again to exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your system.
The grayed items on the screens have fixed settings and are not
Chapter 2 | 25 |
