BIOS Messages

 

Action/FRU

 

 

 

IDE Drive 0 Error

1.

Enter BIOS Setup and load the default settings.

IDE Drive 1 Error

2.

Check IDE drive jumper.

IDE Drive 2 Error

3.

IDE hard disk drive power.

4.

IDE hard disk drive cable/connection.

IDE Drive 3 Error

5.

IDE hard disk drive.

 

 

 

 

IRQ Setting Error

1.

Load default settings in Setup.

Expansion ROM Allocation Fail

2.

Enter BIOS Setup and set the Reset Resource

I/O Resource Conflict(s)

 

Assignments of the PnP/PCI Options to Yes,

 

then reboot the system.

Memory Resource Conflict(s)

 

3.

Remove all adapter cards that are NOT factory-

 

 

 

installed, then reboot the system

 

 

 

PCI Device Error

1.

Load default settings in Setup.

 

2.

Enter BIOS Setup and set the Reset Resource

 

 

Assignments of the PnP/PCI Options to Yes,

 

 

then reboot the system.

 

3.

Remove all adapter cards that are NOT factory-

 

 

installed, then reboot the system.

 

 

 

PS/2 Pointing Device Interface Error

1.

Re-connect PS/2 keyboard and mouse.

PS/2 Pointing Device Error

2.

Enter BIOS Setup and load the default settings.

 

3.

PS/2 mouse

 

4.

PS/2 keyboard

 

5.

System board

 

 

DMI Table Was Destroyed

1. Flash BIOS

 

 

Press CTRL + ALT + DEL key to enter Setup or F1

1. Press CTRL + ALT + DEL to enter Setup and

key to continue

 

reconfigure the system.

 

 

 

Press ESC to turn off NMI, or any key to reboot

1.

Press ESC to reject NMI error or press any other key

 

 

to reboot the system.

 

 

 

Insert system diskette and press ENTER key to

1.

Insert a bootable disk into the floppy disk drive or

reboot

 

remove this disk if a hard disk is installed.

 

 

 

Chapter 4

69

Page 77
Image 77
Acer power sx/sxb/sc manual Assignments of the PnP/PCI Options to Yes