Acer power sx/sxb/sc manual Epp, Irq

Onboard Peripherals
Serial Port 1	[Disabled]
Base Address	[----]
IRQ	[-]
Serial Port 2	[Enabled]
Base Address	[3F8h]
IRQ	[4]
Parallel Port	[Enabled]
Base Address	[378h]
IRQ	[7]
Operation Mode	[EPP]
ECP DMA Channel	[-]
Floppy Disk Controller	[Enabled]
IDE Controller	[Both]
PS/2 Mouse Controller	[Enabled]
USB Host Controller	[Enabled]
USB Legacy Mode	[Enabled]
Onboard Audio Chip	[Enabled]
Game Port Address	[201]
MIDI Port Address	[330]
MIDI Port IRQ	[5]
Onboard Modem Chip	[Disabled]
Onboard Ethernet Chip	[Enabled]

NOTE: This screen can be seen on Acer Power Sxb model.

The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings.

Parameter	Description	Options
Serial Port 1	Lets you enable or disable the serial port 1.	Enabled or Disabled
Base Address	Lets you set a logical base address for each
	serial port. This parameter is configurable only
	if the Serial Port parameter is enabled.
IRQ	Lets you assign an interrupt for each serial port.
	This parameter is configurable only if the Serial
	Port parameter is enabled.
Serial Port 2	Lets you enable or disable the serial port 2.	Enabled or Disabled
Base Address	Lets you set a logical base address for each	3F8h, 3E8h, 2E8h
	serial port. This parameter is configurable only
	if the Serial Port parameter is enabled.
IRQ	Lets you assign an interrupt for each serial port.	4 or 11
	This parameter is configurable only if the Serial
	Port parameter is enabled.
Parallel Port	Lets you enable or disable the parallel port.	Enabled or Disabled
Base Address	Lets you set a logical base address for the	378h, 278h
	parallel port. This parameter is configurable
	only if the Parallel Port parameter is enabled.
IRQ	Lets you assign an interrupt for the parallel port.	5 or 7
	This parameter is configurable only if the
	Parallel Port parameter is enabled.

34 Chapter 2