47
Removing and installing the CPU
The mainboard supports Intel® Pentium® 4 processor running at 533 MHz to 3.06 GHz or Intel® Celeron processor running at 400 MHz to 2.2 GHz and future generations of Celeron CPUs.
Caution! Always observe the ESD precautions when installing or removing a system component. Refer to the “Installation precautions” on page 33.
Removing the CPU
Follow these steps to remove a CPU:
1Remove the system cover. See page 35 for more detailed instructions.
2Remove the air baffle by lifting it up (1) then sliding it to the direction shown below (2).
3 Locate the CPU socket on the mainboard.
Warning! The heatsink may feel hot after long period of usage. It is recommended to allow a few minutes of cooling period before attempting the upgrade.
