4 BIOS Setup utility68
IDE Primary Master Device

The screen below appears when you select any of the the IDE drive

parameters from the Devices and I/O Ports screen:

Parameter Description Option
Device
Detection
Mode
Lets you specify the type of hard disk
installed in your system. If you want
BIOS to automatically configure this
hard disk, select Auto.
If you know your hard disk type, you
can enter the setting manually.
Auto
User input
None
Device Type Indicates a hard disk type device.
Cylinder Specifies the number of cylinders in
your hard disk, and is automatically
set depending on your Type
parameter setting.
User input
Head Specifies the number of heads in your
hard disk, and is automatically set
depending on your Type parameter
setting.
User input
aa r300.book Page 68 Tuesday, March 4, 2003 9:39 AM