39
To install a PCI-SCSI card on PCI slot 2
1 Remove the system cover. See “Removing the system cover” on
page 35 for more information.
2 Remove the two screws that hold the fan blower to the housing
(1).
Disconnect the cable to the fan blower (2) then lift up the fan
blower from the housing (3).
3 Loosen the thumbscrew on the add-on low profile PCI card metal
bracket (1). Flip the latch up to secure the metal bracket to the
system housing (2).
Remove the expansion slot bracket.
Slide the PCI-SCSI card under the fan then insert the card into the
slot bracket (3).
aa r300.book Page 39 Tuesday, March 4, 2003 9:39 AM