42

3 Upgrading your system

To remove the hard disk drive under the floppy disk drive:

aDisconnect the diskette drive (1), hard disk (2) and power cable (3) connected to the floppy drive and hard disk.

Note: To remove the floppy drive cable, use your fingers or a flat screw driver to gently lift the cable retainer on the connector (a) then lift the cable up as shown inset on the figure below.

Attach the cable retainer to the connector and push it in to connect the floppy disk drive cable (b,c).

bRemove the screw that holds the diskette drive and hard disk assembly to the housing (4).

cSlide (5) then lift up the assembly from the system housing (6).

Page 56
Image 56
Acer R300 manual Upgrading your system