74 | 4 BIOS Setup utility |
Parameter | Description | Option |
|
|
|
Quiet Boot | Enables or disables the Quiet boot |
| function. When set to Enabled, BIOS |
| setup is in graphical mode and displays |
| only an identification logo during POST |
| and while booting. After booting, the |
| screen displays the operating system |
| prompt (such as DOS) or logo (such as |
| Windows). If any error occurs while |
| booting, the system automatically |
| switches to text mode. |
| Even if your setting is Enabled, you may |
| still switch to text mode, while booting |
| by pressing the |
| you see the “Press |
| enter setup” message on the screen. |
| When set to Disabled, BIOS setup is in the |
| conventional text mode where you see |
| the system initialization details on the |
| screen. |
Enabled
Disabled
Select Active | When set to Auto, this parameter allows | Onboard |
Video | the system to enable or disable the | Auto |
| onboard VGA card. |
|
|
|
|
Bootup | Allows you to activate the Num Lock | On |
NumLock Status | function upon booting. | Off |
Memory Test | When set to Enabled, this parameter |
| allows the system to perform a RAM test |
| during the POST routine. |
| When set to Disabled, the system detects |
| only the memory size and bypasses the |
| test routine. |
| Note: This parameter can only be |
| configured when the Quick Boot |
| parameter is disabled. |
Disabled
Enabled
Wait for F1 If | When this item is enabled you will be | Enabled |
Error | prompted to press F1 when an error is | Disabled |
| detected during boot up. |
|
|
|
|
Configuration | Displays preboot system configuration | Enabled |
Table | table when enabled. | Disabled |
|
|
|
