110

Appendix B: Altos R300 Rack installation guide

Installing the system into the rack

To install the system into a four-post rack

1Extend the component rail from the mounting rail until the component rail release latch clicks (1). Depress the release latch and slip the component rail out of the mounting rail (2). Do the same thing to the other mounting rail (3).

Note: The mounting rails allow the system to slide in and out of the rackmount for maintenance purposes.

Each mounting rail consists of a fixed outer piece that is screwed onto the mounting bracket with a M4 x L8 metal screw and nut and an inner sliding piece controlled by a steel ball gearing movement.

2 Put the component rails aside.

Page 124
Image 124
Acer R300 manual Installing the system into the rack, To install the system into a four-post rack