Acer Z5610, Z5600 manual Disabled

SATA Port 2

The SATA Port 2 screen allows the user to view and adjust SATA settings on Port 2.

					PhoenixBIOS Setup Utility
Info		Main	Advanced	Security PC Health Power				Boot		Exit
		SATA Port 4			[None]				Item Specific Help
Type:					[Auto]
									User = you enter
Multi-Sector Transfers:					[Disabled]				parameters of hard-disk
LBA Mode Control:					[Disabled]				drive installed at this
32 BIT Data Transfer:					[Disabled]				connection.
S.M.A.R.T.:					Auto				Auto = autotypes
									hard-disk drive
									installed here.
									CD-ROM = a CD-ROM drive
									is installed here.
									ATAPI Removable =
									removable disk drive is
									installed here.
F1	Help		Select	Item	-/+	Change	Values		F9	Setup	Defaults
Esc Exit			Select	Menu	Press	EnterPress	Enter		F10	Save	and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default parameter settingsT

Parameter	Description	Format/Option
Type	The system automatically detects SATA type.	N/A
Multi Sector	The system disables Multi Sector Transfers by default.	N/A
Transfers
LBA Mode Control	The system disables LBA Mode Control by default.	N/A
32Bit Data Transfer	Allows the system 32-bit access to maximize the IDE	Option: Disabled or
	hard disk data transfer rate.	Enabled
S.M.A.R.T.	The system automatically monitors hard disks for	N/A
	indicators of reliability in order to anticipate failures.

Chapter 2 21